Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: IR 50/50 target

  1. #1
    Join Date
    Feb 2003
    Location
    upstate, N.Y.
    Posts
    3,230

    IR 50/50 target

    Anybody have any thoughts on the new reduced size target ?

  2. #2
    Join Date
    May 2010
    Posts
    712
    Quote Originally Posted by tim View Post
    Anybody have any thoughts on the new reduced size target ?
    I don’t find it much different with the heavy rifles but I find it more difficult with the 6.5 X power Sporter scope. Not a lot but enough to be noticeable.

    TKH

  3. #3
    Join Date
    Feb 2014
    Posts
    134
    No real difference to me.

    Click image for larger version. 

Name:	Target_01_shad2_sm31.jpg 
Views:	293 
Size:	50.6 KB 
ID:	25641

  4. #4
    Join Date
    Mar 2013
    Location
    Boothbay Harbor, ME
    Posts
    675
    I find the smaller sighters on the side a little more difficult with a 6x. Otherwise, not much difference.
    I do like the narrower width as far as rest travel though, not that it was ever an issue, just like it better.

  5. #5
    Join Date
    Feb 2010
    Posts
    298
    With my 6 o'clock hold it took some getting used to. With 33% less black on the outer rings it offers a few less holds but after some matches it's fine.

    I do find the smaller sighters offer an advantage over the older larger ones (if you have a nice, tiny dot).

  6. #6
    Join Date
    Oct 2005
    Location
    SouthWest Region
    Posts
    235
    Having trouble with that at my home range.
    Have to be very careful with new targets to not get a shot into record box
    Very easy to put a sighter into record box when windy
    Have had numerous shooters get a penalty with two shots in a record box
    Any else had this issue?

    Dan

  7. #7
    Join Date
    Feb 2010
    Posts
    298
    Quote Originally Posted by danl View Post
    Having trouble with that at my home range.
    Have to be very careful with new targets to not get a shot into record box
    Very easy to put a sighter into record box when windy
    Have had numerous shooters get a penalty with two shots in a record box
    Any else had this issue?

    Dan
    I assume you're aware that a shot has to be completely in the box to be scored as an official shot. For a shot to be completely in a scoring box would be the equivalent of a minus 4 shot.

    If the wind is blowing that hard I'd shoot sighters on the other side of the target or hold off more on the "windy" side until you're more confident of the hold.

  8. #8
    Join Date
    May 2010
    Posts
    712
    Quote Originally Posted by MaxxPower View Post
    I assume you're aware that a shot has to be completely in the box to be scored as an official shot. For a shot to be completely in a scoring box would be the equivalent of a minus 4 shot.

    If the wind is blowing that hard I'd shoot sighters on the other side of the target or hold off more on the "windy" side until you're more confident of the hold.
    Bruce,

    Thanks for the explanation of the rule. I don't think it is widely known.

    TKH

  9. #9
    Join Date
    Apr 2003
    Location
    Wilkes County, N.C.
    Posts
    1,272
    That rule must have changed. Back in the day, even before they put the sighters down the sides, I saw a shot plugged that touched the outer box and scored a -10! Damn good shooting George, lotta x's. LOL

  10. #10
    Join Date
    Feb 2003
    Location
    upstate, N.Y.
    Posts
    3,230
    Quote Originally Posted by Kent Owens View Post
    That rule must have changed. Back in the day, even before they put the sighters down the sides, I saw a shot plugged that touched the outer box and scored a -10! Damn good shooting George, lotta x's. LOL
    Changed years ago.

  11. #11
    Join Date
    Mar 2013
    Location
    Boothbay Harbor, ME
    Posts
    675
    Quote Originally Posted by George Atkins View Post
    No real difference to me.

    Click image for larger version. 

Name:	Target_01_shad2_sm31.jpg 
Views:	293 
Size:	50.6 KB 
ID:	25641
    Nice target George! However its the old target with 3 black outer rings, opposed to the new with only two.
    Also the sighters on the sides are smaller on the new target.

    Keith
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	B24C8267-2DC9-43BF-8A30-A138CE9615B6.jpeg 
Views:	103 
Size:	2.81 MB 
ID:	25653  
    Last edited by linekin; 08-09-2022 at 05:31 AM.

  12. #12
    Join Date
    Oct 2016
    Posts
    68
    So the 10 ring size has not changed? Just the OD of the outer ring? When did this change happen?

    Todd

  13. #13
    Join Date
    Mar 2013
    Location
    Boothbay Harbor, ME
    Posts
    675
    Quote Originally Posted by todde View Post
    So the 10 ring size has not changed? Just the OD of the outer ring? When did this change happen?

    Todd
    Todd, the size of the scoring rings hasn’t changed. The outer back ring was removed as well as a ring on the sighter.
    Happened some time last year. I ran out of the old targets 2 matches ago but had bought the new from Jason last fall. 1st shot it at Braxton in late July/ early August.’21
    It was done to decrease weight for shipping & printing costs. Didn’t hurt that it frigged Bruce up a match or 2 either. Lol
    Last edited by linekin; 08-09-2022 at 11:52 AM.

  14. #14
    Join Date
    Oct 2016
    Posts
    68
    Quote Originally Posted by linekin View Post
    Todd, the size of the scoring rings hasn’t changed. The outer back ring was removed as well as a ring on the sighter.
    Happened some time last year. I ran out of the old targets 2 matches ago but had bought the new from Jason last fall. 1st shot it at Braxton in late July/ early August.’21
    It was done to decrease weight for shipping & printing costs. Didn’t hurt that it frigged Bruce up a match or 2 either. Lol
    Thank you. I didn't know there had been a change.
    Todd

  15. #15
    Join Date
    Mar 2013
    Location
    Boothbay Harbor, ME
    Posts
    675
    Quote Originally Posted by todde View Post
    Thank you. I didn't know there had been a change.
    Todd
    I hear 'ya. News travels real slow.
    FYI, there's a factory class now too, evidently. Call Jason per the rules. Last I'd heard they would be minimal as far as restrictions. Meaning anything goes, as long as its completely factory. That may have changed though.
    Keith

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •