Page 2 of 2 FirstFirst 12
Results 16 to 27 of 27

Thread: Inside neck lubing with MOLY

  1. #16
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by billbrawand View Post
    also use schot brite in small pieces to clean necks.
    i am making new ejection frames for rockcfhucker presses. Makes easier feeding. 1 814 335 0450 c.

  2. #17
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by billbrawand View Post
    i am making new ejection frames for rockcfhucker presses. Makes easier feeding. 1 814 335 0450 c.
    have two barrels never fired in match for pandaa 30 short and 30 by 47 400 dollars for both/.

  3. #18
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by billbrawand View Post
    have two barrels never fired in match for pandaa 30 short and 30 by 47 400 dollars for both/.
    new ejection phrases makes making bullets faster.

  4. #19
    Join Date
    Jul 2005
    Posts
    652
    Quote Originally Posted by BillBrawand View Post
    been using graphite since 1973 works fine.
    Been doing this for years.
    Bunch of fine lead shot with graphite all over it.
    Works good for turning and sizing.

    I would not anticipate using it to lubricate the inside of the neck for shooting.
    For the most part you need a decent amount of neck tension to get good powder burn.

  5. #20
    Join Date
    Oct 2019
    Posts
    701
    it all depends.
    if the bullet is at or in the ands less actual mechanical neck tension is required. a slow burning powder in a case limited by mag length MAY benefit from a bunch of tension.
    best to try various amounts in each case.

    and yes it is being used on loaded ammo.

    Quote Originally Posted by brickeyee View Post
    Been doing this for years.
    Bunch of fine lead shot with graphite all over it.
    Works good for turning and sizing.

    I would not anticipate using it to lubricate the inside of the neck for shooting.
    For the most part you need a decent amount of neck tension to get good powder burn.

  6. #21
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by rsmithsr View Post
    it all depends.
    If the bullet is at or in the ands less actual mechanical neck tension is required. A slow burning powder in a case limited by mag length may benefit from a bunch of tension.
    Best to try various amounts in each case.

    And yes it is being used on loaded ammo.
    use graphite for lub when neck turning

  7. #22
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by remy View Post
    hi guys would like to ask how to prepare the moly or which moly type is used to lube inside case neck ?
    The method im after is the one ive seen in video by lou murdica in which he dips a brush in a solution, not sure if dry or wet and proceeds to lube inside case neck , if wet would like to ask how to prepare and which solvent is used to do this ?

    Thanks to amo reply in advance,

    cheers remy
    inside neck with q tip light

  8. #23
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by billbrawand View Post
    inside neck with q tip light
    with s t p .

  9. #24
    Join Date
    May 2010
    Posts
    42
    Burts Bees lip balm. I lightly coat the expander mandrel and expand away..

  10. #25
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226

    Cool

    Quote Originally Posted by remy View Post
    hi guys would like to ask how to prepare the moly or which moly type is used to lube inside case neck ?
    The method im after is the one ive seen in video by lou murdica in which he dips a brush in a solution, not sure if dry or wet and proceeds to lube inside case neck , if wet would like to ask how to prepare and which solvent is used to do this ?

    Thanks to amo reply in advance,

    cheers remy
    get a plastic cap deep to have graphite in and dip cases in it will lube inside used since 1973.

  11. #26
    Join Date
    Feb 2006
    Location
    Wilcox, PA
    Posts
    1,226
    Quote Originally Posted by billbrawand View Post
    get a plastic cap deep to have graphite in and dip cases in it will lube inside used since 1973.
    or q tip with s t p .

  12. #27
    Join Date
    Jul 2005
    Posts
    652
    Quote Originally Posted by BillBrawand View Post
    been using graphite since 1973 works fine.
    Motor Mica has worked for me in live varmint rifles.
    Panda actions, Jewel BR triggers.
    Right bolt, left port.
    18x-40x scopes.
    Leupold Scope with a power doubler.
    Before Precision Reticles died.

    They start life as .22-250 AI and 6mm REM AI.
    Both 30 inches long.
    I generally stop using them after they have been set back five or six times.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •