Quote Originally Posted by GeneT View Post
Are you sorting pellets, washing & lubing, or skirt forming? I'm wondering if you could weed out that 'spiraling flyer' ahead of time.

I've tried cleaning and lubing but not skirt forming.

I've washed the pellets with a very dilute solution of Dawn dish soap. After drying overnight, the pellets were then:

Left clean, or
Lubed with a very light coating of Imperial Sizing Wax, or
Lubed with RWS chamber lube.

All variations performed the same - one or two spiraling flyers each card.

The odd thing was that the RWS lubed pellets shot about 10 fps slower on average than all the others. These pellets were so "slippery" that I had some trouble loading.

I'm not familiar with skirt forming. Is there a tool for that?