Results 1 to 3 of 3

Thread: Tuning a new railgun where to start?

  1. #1
    Join Date
    May 2018
    Posts
    43

    Tuning a new railgun where to start?

    I have a new rail and am getting ready to start playing with it. Do you just do normal load development like a bag gun? Iíve also been told to clamp a piece of wood to the bench so the front of the rail so it doesnít move. Any advice on where to start would be helpful. Thanks guys.

  2. #2
    Join Date
    Feb 2003
    Location
    Mt Pleasant Michigan
    Posts
    458
    Yep, start with the same loads as usual if your chamber is the same.
    I use the same brass as my bag guns.
    Also when you clamp a block to the bench, make sure the base is hitting it square or your gun will want to move.

    Joe Hynes

  3. #3
    Join Date
    May 2018
    Posts
    43
    Thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •