Search:

Thats an interesting way to approach it.

Pete

for a no bullet size advantage?

Thanks,

Pete

A means to an end, if you will. I'll prolly send it off to a willing relocator after the shooting season is over.

Pete

of loading pictures here is or use to be complicated as I recall so if you PM me your email or phone number, I'll gladly send you a picture. I used Loctite Professional Super Glue to bond it.

It...

Got to thinking about this and came up with the idea of a shim. I figured if I cut a shim the same size as the face of the cam surface on the bolt and bonded it to the bolt, it would be the same as...

Bill Smith telling me Dr Pekaar was in an assisted living home but that was years ago now. Lou Budreau (sp) may know if he watches this board or is someone has his contact info, they might get in...

The right thing to do. As cases are shot, they grow and get harder and harder where they aren't suppose to be annealed so one has to do something.

Pete

the recommendation on here to open the ass of the chamber up a couple of thou using some emery on a dowel. They all say it works. I've meant to do one of mine to see but never think to do it.

Pete

My bolt is no more dangerous than many other rifles being shot on a regular basis. I plan to re-time the action myself.

Pete

At how Rimrock extractors are installed before you deem that folks should cut up their bolts, Just sayin.

Pete

When the IBS item failed in that annual meeting all but one of those who wanted the change quit shooting abruptly. Sure , they could have continued shooting 6 MM's and the VH class was always open to...

your logic is the prevalent one and has been for a number of years. People like what they like and believe what they believe. Probably all of the nostalgia for the old is all but dead and will be...

still bemoan allowing custom actions being used in the Hunter classes. They feel much of the essence of the game was lost by allowing them. I don't disagree. I have seen many a factory actioned rifle...

But today Brian Fitch won the first Bill Plummer Memorial Trophy for winning the 200 yard segment of the Maine Firecracker annual three yardage annual IBS score shoot, to commemorative Bill Plummer's...

but couldn't quite get a mental picture as to how to do it. DO you mean drill the bolt handle or action?

Pete

the only game in town, one must do what one must do.

Pete

I didn''t believe the bolt was unsafe and why I won't cut it up. As I've said, I did witness a Sako extractor blowing out of a bolt on one occasion so I know it is a reality. The extractor was...

to that youtube suggesting it is improper to drill through a Rem 700 bolt to install a Sako extractor and explained why. I have two of them, done by different Gunsmiths who drilled right on through....

I think this would not happen in your chambers Al.

Pete

Your advice is well received. I'll see what I can find.

Pete

The bolt extraction cams do not touch at any position of the bolt's rotation. I have to wait a second or two to be able to open the bolt after firing to open the bolt easily. The bolt functions fine...

I have a Stainless Steel Remington action with a SS bolt handle on it's bolt. There is zero primary extraction with this bolt, which isn't all that unusual, from what I have been reading. Is there...

Changes Worst edge to center to center, by the way.

Pete

Frank is a good guy, hell help ya.

Pete

pretty much trusts each other. If someone gets taken, the information would be quickly spread. It is a sad state of affairs that there are scammers widely in our society who routinely make a living...