The Remington ejectors will start levering the front of the case sideways as soon as the bolt begins moving rearward. It's common to reduce the spring tension by clipping coils from the stock spring...
Type: Posts; User: Al Nyhus; Keyword(s):
The Remington ejectors will start levering the front of the case sideways as soon as the bolt begins moving rearward. It's common to reduce the spring tension by clipping coils from the stock spring...
Can't Brownell's just reship to you? -Al
Actually, I used wooden chop sticks from my favorite Mandarin restaurant. ;)
Understand that anything that moves the cam angles away from each other reduces the amount of mechanical extraction.
-Truing up the internal lug abuttments moves the angles apart because...
30BR cases done with pistol powder, a hard tamping of tissue paper and a PlayDoh plug.
https://i.imgur.com/QKYM3Bml.jpg
https://i.imgur.com/cf6Z6sYl.jpg
Case necks come out nice and...
Wayne, my preference is a RB/RP.....given a decent sized loading port. On my RB/RP Panda I can pull the bolt back, toss a new round in and flick the old one out with my index finger tip as my hand is...
I'd strongly suggest connecting with a knowledgeable BR shooter in your area. I was fortunate to have several excellent mentors when I was starting out and their advice and help was invaluable....
Where are you located? -Al
Assuming a standard accuracy freebore diameter of .3085 ish, how are you going to reach the rifling with a .3089-.3090 shank bullet? -Al
I worked with a Beggs tuner on one of my 10.5 lb. 30BR (the RFD Red Hammer 'Snake Gun').
John Cascarino worked his tuner hard at Webster City last week.......
Good shootin' -Al
...
Yes...page 4 of the latest issue. -Al
From the Boone Valley Issac Walton range in Webster City, Iowa, here are the results from the VFS100, 200 and 100/200 Grand Agg. Temps were warm both days with the heat index pushing into the low...
This ^^^^^^
Why not call one of their dealers and find out?????
Silencer Central is local to me. The owner has lead the way for quick turn around times for suppressor approval and did the testing for the BATF for their online process. At this point, they are...
Just seat the bullet excessively long....say .030 of the base into the neck. No need to go .001 at a time at first...more like .005 to .010. Once you start doing this, you'll get a feel for it....
I hear 'ya, Mike. ;)
The late Dick Wright authored an excellent article in P.S. about using the stripped bolt method. And Tony Boyer's book explains it very well, too.
On these .30s, a...
"Seating depth .020 longer than when the rifling marks just disappear when using the stripped bolt method of checking seating depth."
Don't work forward to find where they touch.... work...
I'm not Randy (Randy can be thankful for that:D) but here's my approach:
- A bushing .004 under what the neck measures over the pressure ring of the seated bullet
- Seating depth .020...
Yessir, they do indeed.....:cool: -Al
Darrel Holland did a lot of those style rifles in the 1990's. I shot a couple of them in 22BR and 6BR. They shot very well for live varmint rigs....just like a well done conventionally bedded rig...
The Mustang went to a notch back Fox body collector in Arizona.
I then 'retired' from Benchrest competition and returned to NHRA Drag Racing with this '68 Chevy II Stock Eliminator that ran...
I have a neighbor couple that are semi-preppers....he's fairly laid back but she's super serious and a bit of a doom and gloom type.
She was showing me their stock of supplies and I asked if...
My good pal Stan Ware told me this 'Spam Story':
Stan lived in Windom, Mn. and was drafted into the Army and went to Viet Nam. Also in Windom was a company that had an Army contract for...
You might want to have him check with Mack Bros. I've seen some of their replacement bolts and they're very nice. While their site doesn't show it, they do have the .378 bolt face bolts available....