Search:

Hi Sir Antelopedundee


Other than slower evaporation rate, could it create any other problems?
Would it be convenient to look for a faster evaporating solvent, in your opinion?
I'm from...

Al Nyhus

I`m sending you a PM

Hi guys


I intend to wash a batch of jackets to eliminate oil residues present.
However, pure acetone and MEK are controlled products and difficult to obtain.
What other solvents could be...

Good question.

Seems that Stamoly too have a dedicaded bullet swaging press. I nice piece of equipment

I tried Magtech small rifle primers on glock 17. Had a lot of misfires.
too hard cups

Dear rsmithrs

I sent you a PM

TrxR


For 224 "projectiles, I purchased Mr. Larry Blackmon's dies.
Using J4 jackets, I produced 52 grains flat base bullets that grouped as good or better than Berger and custom on my 223...

If this question is way off topic, let me know, I will delete....no hurts


What can I do to keep the bullets shiny after they are pointed, degreased and polished on the rotary thumbler?
I wish...

About the consistent core cutted weight.

I tried to cut the cores longer than needed, form then heavier and do another pass in the core forming die to final weight, , so to achieve more...

Oliveoil, sorry for hijacking your thread.

Randy and others...

Could an excess of lube cause the bullet to stick to the BT punch instead of being removed by the ejector pin?

Thanks Randy


So, therefore, if I separate the cores by weight, using an ADI scale, and seat the heavies cores in the lighter jackets, is a waste o f time?

My cores vary in weight from 108,00...

So, in the 110 grains cores,(for 308 bullets) what wil be considered a acceptable variance in weight? will a harder alloy allow more consistent weight or the opposite?

What is the rules for...

I live in Brasil.

I requested some specs for 308 reamer to JGS. They refused to inform, because I am not USA resident

Since we are talking about bullet making, I have a question( a lot, to be honest..)

Will a to hard lead alloy prevent the core to fullfill the core forming die completely?

I ask because this is...

I always had good results with Berger 108 BT
But with a new batch of Berger, I was having a harder time having good groups. So I borrowed a box of 500 units of Bib 108 grains (I believe it's an...

Mike

Along with the 6 PPC rifle you assembled to me, I bring 5k Gentner 65 grains BT bullets. They group really well in this rifle.(10 year ago, already...)

Barts

https://www.amazon.com/Fiebing-Company-100-Pure-Neatsfoot/dp/B00Q486RC2



Will this work? Or are they different things?

Thanks

Its time for a new barrel in my PPC rifle.

I know thenon is 1-1/16 X 18 TPI

However not sure its 55° or 60°.

Maybe someone can answer this question before Bat do


Thanks

Dave, thank you for your feedback

I know that Barnard PLM action have larger diameter, compared with Stiller TAC338. But as I never seen one, dont sure if is possible do these modifications. ...

Thank you Dave

With a milling machine, is possible open the DBM a little bit and adapt one longer magazine? If they aren´t available(magazine), maybe cut the front or back side and some welding...

Hi Mike



I observed that even using a CIP-sized magazine, 300-grains projectiles are heavily inserted into the case, occupying powder space and that the projectile base is beyond the neck /...

Who have the longest allowable lenght DBM for 338 LM caliber? I believe Badger have for CIP lenght. Anyone have a longer yet?



...

223 for fclass is a funny project. Here in my country, we have only 300 meters ranges(soon will have 600 yards too), so this small caliber is fine, unless too much wind.

I never got good...