Search:

I will miss him, we were alway talking, one jar head to an other.... RIP. brother..... Jim

It sure takes a lot longer to build a gun right than it does to chamber a barrel... a well known GS. just sent me a pic of seven barrels he did in 3 hrs. on his new cnc machine.... Jim

That is timing, to close smoothly, but to engrave one .130 seems a bit much to me..... Seems most rimfire guys don't talk about firing pin travel or spring tension at the cocked height or even...

Yes, you can get them about anywhere ...... Jim

Tony, what I'm saying is that tight fit mean almost nothing.... I have Borden actions with .0015 clearance and Kelbly's that. are on the fat side of ,0035 and they both shoot in the zero's at 100....

I don't have a custom action that won't do the same without a huge bolt handle on it. they will all close nice and slow with the right lube on them. Closing cam what is that ? Cocking cam means more...

Tony, A pre 64 model 70 will do the same thing, open the bolt and tilt the muzzle down and the bolt will close and the bolt handle will fall down and it was with a complete bolt ..... no big deal...

Kev, Good to hear, that is the best thing I ever done, saves a ton of guess work to be able to test all the lot and be able to buy what worked best...... Jim

Sad to hear that the test site is closing down and Luke is moving on. Had a good test with a lot of different lots. I have a different out look on what will happen when the gun goes back in the...

I also measure the poundage of the spring at the cocked height, it controls everything...... Jim

are you talking firing pin protrusion or fire pin travel? Jim

I think you will find that Hart went to Douglas to learn how to make button barrels ..... Jim

Evelio, Yea, once in awhile I get lucky this year I got a chunk of the World open..... Jim

There is a slight difference, I'm 100% disabled from the service, Can't hear and can't see very good and now have breathing problem. I have trouble sleeping other than that the rest of the problems...

Evelio, Thanks for the tip and it worked .... I can't see it on the bullet but I can see it out of the barrel from touch. I did remove the lube and was a more positive stop. Thanks again for the...

Tony, I hope to bump into you at Wilson or McKeesport this summer, So it's all about a little fun now ..... Jim

Tony, I don't do wallet groups and I admit I'm new at .22 BR. I don't and can't at this point in life be competitive anymore it is kind of a end game for me at 78. In my day I set 5 world records at...

Tony, at the Lapua test site my best group at 50 meters was 11.02, that was bolted into there jig and no tuner adjustment and that was 24 speed. I'm sure after it is back it the stock and I can set...

Tony, that is what I was looking for but that isn't the case...... Jim

I tried everything to see it but at best you may a shiny spot from the leade touching. Evelio McDonald did the chambering..... Jim

Tony, that is correct, I used different magnification and was concerned about and I text Lee about it and thats the way they are... At the test site at Lapua in Ohio ten shot groups were small at 50...

I know you don't see any land marks on the Nevius chamber..... Jim

Tony this is a good thread glad you started it...... Jim

Tony, I'm surprised you use a floating reamer holder over a dead center..... Jim

It was recommended for Lapua through the work Keven Nevius did..... Jim