Al Nyhus
"It'll never work!"

You might want to have him check with Mack Bros. I've seen some of their replacement bolts and they're very nice. While their site doesn't show it,...

If you're bedding the rings after lapping, the Permatex valve grinding compound gives an excellent finish for the bedding compound. Good...

I misunderstood your statement about .006 to mean the case length was .006 shorter on that round. Reading it again, you were clearly referencing neck...

With a VLD tool, the necks can get pretty thin at the mouth. Depending on how big the chamber neck is, it's possible that the very end of the neck...

Agreed! :cool: Gene has put in many, many hours of behind the scenes work to make these happen. And to everyone like Gene that volunteer...

One thought....take a good look inside the case necks at the neck/shoulder junction area. Did the last round hit wonky on the target or did...

Calvin, my bet is that your 2.5 would be ideal for Danny. Just sayin'....... ;) -Al

Yep. They are inletting a flat top for me know. ;) -Al

Absolutely, Calvin! :) Good shootin' -Al

Quick question: how are you going to get those pilot holes in the stock...not off axis in any plane...and with an O.D. that gives you a repeatable...

The late Dick Davis from McMillan told me that before the advent of CNC inletting programs, they first positioned the action screw holes perfectly....

Danny, sorting through stuff like this can get pretty difficult, via the written word. Again, I'd encourage you to simply send three fired...

What does a case measure at the back end after it's sized in your full length die (77524)? -Al

Danny, if your dimensions of .466 on the back end if the Redding f.l. die are correct, that's different than the one I have. Mine is right at .470,...

If your .470 measurement at the back end is accurate, that's a pretty small chamber for Lapua cases........:eek: -Al

Good plan, Danny. :) Harrell's also supplies a slick little bushing to help you measure the amount of shoulder bump. Keep us posted, sir....

Danny, this is the heart of the matter. The truth is you want to full length size the brass each firing to maintain consistent accuracy. I'm not...

So....is the 'click' right at the top of the bolt opening where the camming starts? Just heavy bolt lift as soon as the bolt is opened and all the...

I never had the chance to meet Mr. Plummer but his 200 yd. record was something all 6X Hunter competitors looked up to. Shooting a 250 @ 200 yds...

Mike, a couple of thoughts after working with a 30BR having issues as you describe: -Have you tried a light stress relieving of the 'clicker...