Hi-NV Shooter
Registered User

Kevin, I been an advocate of using your chambering specs. because for shooters like my shelf who are not chasing National titles and just want good...

Great information Kevin! Lee

Sorry I didn't. but FWIW I run a wet pellet every 30-50 rds. or every card I shoot. Lee

Tim, I have a barrel that I believe was a little tighter in the bore size then I have seen before had it chambered like other barrels and engraving...

Tim, I am wondering what would be that much different from Lapua than Eley that would cause an out of tune? I see this brought many times IMO could...

Tony, I just remembered that some of the rifles for this type of shooting have what is called control feeding. the RimX comes to mind as you can't...

Tim, if the barrel work was done by Vudoo they are supposed to be optimized for Lapua Lee

Tony, I believe the rifles are magazine fed so maybe tradition BR chambers may cause an issue. Lee

I understand now I believe you use magazines to feed rounds in PRS unlike F-class Lee

There are different thoughts on what is ideal. here is one that I been using for several years with great results. go to Rimfire Accuracy and look up...

Thanks, Jerry, for sharing your experiences when turning the OD of a barrel. you shared a lot more than I expected. my question was directed in...

Tim, I like to try different things just to see how it may work. for me the fun is tinkering and if the rifle does well then even better. Lee

Tim, some barrel contours are 1.200 at the chamber end from anywhere in length of 3-4". turning them to have a better fit/transition to action. ...

Jerry, in post #4 you mentioned a detectable bore growth when reducing the OD by .100 or more and you feel this is not good, so I understand you are...