beanie
Registered User

yes i started with 1/2" and then opened a little. after live fire testing will seal it all.

i found pics of funnels...NONE IN STOCK and cut based on the internal shape of those funnels my action now drops a dasher case out the bottom....

se there is an advantage to a 67 vw...no electronics..... as far as scrubbing use body temp water to prevent skin pores from closing on debris....

brownells sells small plastic jars in various grits

It was a practical session in the psychology class. The professor showed a large cage with a male rat in it. The rat was in the middle of the...

ya need to chamfer the case necks and they are probably too small, and too hard

so i did as i said, i lined up the 2 stocks as best i could and drilled two 257 holes. i then took the new stock and laid out a center line. it...

so thanks for all the input. it appears that if i want to shoot this rifle this year(nationals in sept), i need to do it myself. i have spent time...

but just as you profess support, i am allowed the opposite when it is true. now to see if you can let it go

the pillars in the old stock have an F hole(257). the pillars are my drill bushings

but to be real clear if they quit making it yesterday,and you want it inlet tommorrow too bad.. and not a new customer a long time repeat...

so, i have one inlet stock, fully bedded to the same basic action. i think this provides a tool to guide the location of the action screws. once...

and in this case i disagree with yours. opinion or not inletting has been part of their day to day biz...until now moving on

i have a masterclass stock as well..bought from alex. but i think he has gone to wood only...and then there is the distance...he aint close. ...

well there is always two sides to a story i am local to mcm, and they have inlet several of their stocks for me. BUT I BOUGHT A WHEELER/MCMILLIAN...

I CAN do a pattern/layout based on the first stock, remove a ton of material with just down cuts my big concern is getting it all straight/inline...

hmmmmmmmmmmmmmmmmm if you look in the back..it clearly says the brand that was listed....the building in the back is a generator...for the charging...

you are backwards thinking to the CURRENT process used in br. fl sizing with a shoulder bump of 1-2...now the fl is also slight for both wilson...

methinksnot

you are mean and evil!