jackie schmidt
Registered User

I never really fooled around with Graph/Mo. I can see the hardening capability with that 1.45% carbon. I wonder if, like leaded steels, they...

Randy, back before I started making my own 30’s, when I did quite well with yours, I always seemed to shoot the best Aggs with your 112 on the .925. ...

George, I did not realize they were that hard. That is right up there with most High Speed Steels.

^^^^^^^ The distance you shoot a 30 BR at means using the most accurate bullet/Barrel/powder combo as possible. Day in and day out that’s a...

Dave, that’s about what I have heard. Some say hat the Eubers made up to 3 million on that famous 6 mm die of theirs. I remember talking to Allie...

Randy, we all know that for the past years Al has been chasing a NHRA Stock Car Index, where they measure gains in .001 of a second increments down...

Al, are the Blackmon dies Carbide or Tool Steel. Just curious. Those bullets look great. I am locked into a .925 jacket bullet because I have...

Especially when they shoot well:cool: What are the particulars on your new die?

Thanks Wayne.

By the way, folks, this was Scott’s first Two Gun Championship. I feel confident in saying it will not be his last. I had a thoroughly good...

Leaded steels are simply steels that have lead added at at the pour. The lead literally gets between the individual molecules of the parent metal....

http://benchrest.com/attachment.php?attachmentid=25455&d=1651456333&thumb=1&stc=1

Well, todays weather kinda started out decent, but by the 3d Match at 200, it was pretty obvious we were all in for a full day of “lamentations and...

:eek: The darn stuff machines so well that sometimes just turning on the lathe will cause shavings to fly It does case harden just fine. ...

Dietz Range north of New Braunfels. https://www.dietzgunshop.com/

http://benchrest.com/attachment.php?attachmentid=25422&d=1650842782&thumb=1&stc=1 ...

Gary Walters and Vic Smith A1219C8FE5AB http://benchrest.com/attachment.php?attachmentid=25421&d=1650842629&thumb=1&stc=1