Results 1 to 5 of 5

Thread: Jewell Trigger in 40x Rimfire?

  1. #1
    Join Date
    Mar 2009
    Posts
    48

    Jewell Trigger in 40x Rimfire?

    Anyone here know the 40x Rimfire action well? I am wondering if there is any reason I cant run a Jewell BR700 trigger without bolt release in my 40x rimfire rifle?

    Thanks

  2. #2
    Join Date
    Sep 2016
    Posts
    5
    Quote Originally Posted by TrxR View Post
    Anyone here know the 40x Rimfire action well? I am wondering if there is any reason I cant run a Jewell BR700 trigger without bolt release in my 40x rimfire rifle?

    Thanks
    YES you can. You will need a small flat blade screwdriver to depress the bolt release lever on the left side of the action. With the bolt all the way to the rear look in the left side and you will see it. Depress it and the bolt will move to the rear. It will stop when the locking lug engages the stop. Depress it again and remove the bolt. Some make a small tool instead of a screwdriver.

  3. #3
    Join Date
    Feb 2003
    Location
    Bolivia, NC
    Posts
    254
    The small Buck pocket knife I usually carry makes a fine 40X bolt removal tool.

  4. #4
    Join Date
    Feb 2003
    Location
    Alaska
    Posts
    265

    40X-40XR Rim Fire

    The 721/722/600/660/673/XR-100/XP-100R/Seven/40X/40XR utilize a 3 pin trigger group/bolt release configuration.

    A Jewell HVRTSXR-ABC trigger group is Top RH Safety w/ Seven Bolt Release Lever.

    A Jewell HVRSBR-ABC trigger group is Bottom Safety that would need to be re-configured w/ a Seven Bolt Release.

    My personal 40X's & 40XR's are set up with the above Jewell trigger groups.

  5. #5
    Join Date
    Mar 2009
    Posts
    48
    I ended up ordering a BR trigger without bolt release.

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •