Results 1 to 3 of 3

Thread: Harrels turret press

  1. #1
    Join Date
    Dec 2012
    Location
    Valdosta Ga
    Posts
    88

    Harrels turret press

    Is anyone here using a harrels turret press to load at the range .
    Could I get the pros and the cons .
    Thank you Jeff

  2. #2
    Join Date
    Apr 2017
    Location
    Humble, TX
    Posts
    33
    I use one to resize 6BR, 30BR and 284Win brass at the range. Saves on multiple presses or die swapping. The change I made to mine ( a common modification ) was to undercut the bottom of the washer on the center screw so I can lock the head down so there is no play in it. The center post is proud of the head by about .010" of an inch to allow it to index freely which also allows the head to cock ( very slightly ).

    I like mine very well.

    Gregg

  3. #3
    Join Date
    Jul 2007
    Location
    S.E. MI
    Posts
    2,045
    Get the Combo press.....works with LE Wilson bullet seating dies....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •