Results 1 to 15 of 24

Thread: Bullet Seating Depth

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2018
    Posts
    11

    Bullet Seating Depth

    Using a Redding Competition seating die I am not able to get consistent
    seating depth. I am loading for a 6BR. The die is clean, the case holder is clean
    the cases are as exact as I can get them and yet I will get a variation in seating depth of
    +/- .0025 on a regular basis. Any help would be much appreciated.

  2. #2
    Join Date
    Jul 2011
    Location
    Phoenix Az
    Posts
    140
    Quote Originally Posted by Pagosa Scott View Post
    Using a Redding Competition seating die I am not able to get consistent
    seating depth. I am loading for a 6BR. The die is clean, the case holder is clean
    the cases are as exact as I can get them and yet I will get a variation in seating depth of
    +/- .0025 on a regular basis. Any help would be much appreciated.
    Are the necks the same size ?

  3. #3
    Join Date
    Apr 2018
    Posts
    11
    Quote Originally Posted by classcat View Post
    Are the necks the same size ?
    Yes, they are all run through the same Redding bushing neck die

  4. #4
    Join Date
    Dec 2017
    Posts
    585
    is the tip of the bullet hitting the interior of the seating stem ?
    what cartridge(ok 6br) what bullet ?
    how are you seating, what press

  5. #5
    Join Date
    Apr 2018
    Posts
    11
    Quote Originally Posted by retired View Post
    is the tip of the bullet hitting the interior of the seating stem ?
    what cartridge(ok 6br) what bullet ?
    how are you seating, what press
    Hitting the interior of the seating stem is a good question.
    I will check that out. Bullets are usually either Berger 65 grain Web BR, or
    Bart's 66 grain Ultra. It is a Redding "The Boss" press, cases trimmed to length with
    a Sinclair Ultimate Trimmer +.001 - 0, necks turned with a K&M neck turner +.001, -0,
    and the bullets are being seated with a Redding Competition seating die. I

  6. #6
    Join Date
    Feb 2004
    Posts
    257

    Bullet seating

    What tools are you using to measure seating depth?

    Do you measure from bullet tip to base of the case or ogive to base?
    Last edited by tenring; 04-10-2018 at 02:49 PM.

  7. #7
    Join Date
    Mar 2013
    Location
    Nelson New Zealand
    Posts
    61
    Are your loads compressed ?

  8. #8
    Join Date
    Apr 2018
    Posts
    11
    Quote Originally Posted by Kiwi Greg View Post
    Are your loads compressed ?
    I don't think so, but another good question.

  9. #9
    Join Date
    Apr 2018
    Posts
    11
    Quote Originally Posted by tenring View Post
    What tools are you using to measure seating depth?

    Do you measure from bullet tip to base of the case or ogive to base?
    I measure with a piece of the barrel that duplicates the chamber. So I can measure with one end
    from ogive to base or other end lands to base.

  10. #10
    Join Date
    Jul 2011
    Location
    Phoenix Az
    Posts
    140
    Quote Originally Posted by Pagosa Scott View Post
    Yes, they are all run through the same Redding bushing neck die
    Let me rephrase the question . Are the necks cut ?

  11. #11
    Join Date
    Apr 2018
    Posts
    11
    Quote Originally Posted by classcat View Post
    Let me rephrase the question . Are the necks cut ?
    Yes, I trim all the cases to length, very consistent with a Sinclair Ultimate Trimmer.
    But I fail to see how that could have an effect since the distance from the case holder to the
    seating die doesn't change.

  12. #12
    Join Date
    Jul 2011
    Location
    Phoenix Az
    Posts
    140
    Quote Originally Posted by Pagosa Scott View Post
    Yes, I trim all the cases to length, very consistent with a Sinclair Ultimate Trimmer.
    But I fail to see how that could have an effect since the distance from the case holder to the
    seating die doesn't change.
    Not the length, but the diameter. Uneven neck tension can give you uneven seating depths. Light neck tension will yield the same results.
    Last edited by classcat; 04-10-2018 at 05:34 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •