Results 1 to 5 of 5

Thread: Any F-classers using Tubb's firing pins? Springs?

  1. #1
    Join Date
    Dec 2006
    Posts
    5

    Any F-classers using Tubb's firing pins? Springs?

    Just wondering if any of you guys are using David Tubb's lighter firing pins and/or his FP springs? Thanks!

  2. #2
    Join Date
    Sep 2014
    Location
    La Mesa CA
    Posts
    19
    I am using his dual springs in my Rem 700 Action it cut the bolt jump down to almost nothing.

  3. #3
    Join Date
    Dec 2006
    Posts
    5
    Quote Originally Posted by Willbas View Post
    I am using his dual springs in my Rem 700 Action it cut the bolt jump down to almost nothing.
    Are you using your factory firing pin, or his lighter aftermarket one?

  4. #4
    Join Date
    Sep 2012
    Posts
    26
    I tried his duo-spring in a Panda F-Class action. Effect on accuracy was not good. I also would not use a speedlock reduced-weight FP. It's great for when you need a quick lock-time (when you are slinging it up maybe), but it has a detrimental effect on accuracy, when you are trying to hold a half-MOA X-ring or better.

  5. #5
    Join Date
    Sep 2014
    Location
    La Mesa CA
    Posts
    19
    Quote Originally Posted by fatelvis111 View Post
    Are you using your factory firing pin, or his lighter aftermarket one?
    I have a PTG bolt in my Rem 700 with their steel small firing pin non fluted.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •