Results 1 to 4 of 4

Thread: 9.3X62 vs. 9.3X64 Dies

  1. #1
    Join Date
    Jan 2005
    Posts
    711

    9.3X62 vs. 9.3X64 Dies

    What problems would result from using a 9.3X62 neck sizing die and bullet seating die for reloading 9.3X64 brass?

  2. #2
    Join Date
    Feb 2003
    Location
    Tennessee
    Posts
    5,282
    I really don't know but if the only difference is 64 vs 62, and I had some dies, I'd give it a try and see. Doesn't sound like much difference.

    Found this (Avast believes there's a problem here):
    http://www.longrangehunting.com/foru...-9-3x64-11532/
    Last edited by Wilbur; 06-09-2015 at 01:51 AM.

  3. #3
    Join Date
    Sep 2014
    Posts
    96
    I do believe the 64 case is a larger size, IIRC, head size and body

  4. #4
    Join Date
    Jan 2005
    Posts
    711
    Quote Originally Posted by Jim Kobe View Post
    I do believe the 64 case is a larger size, IIRC, head size and body
    The difference in case head size is 0.031 inch. There should be enough clearance in a 9.3X62 neck sizing die for the 9.3X64 case to enter. Not sure about the bullet seating die?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •