-
Lt-30 in 30x47
Just checking to see if anybody has tried lt-30 in 30x47 with 112-118gr bullets?
-
-
-
lt30
only in a 30br , not in a longer case...
but my oal is 2.38 with a 115...a bit longer than your average 30br.
still a bit short of your 47.
i think it is bad news as it produces velocity at a full case....a bigger case might be a bigger air space or too much
powder when full
Last edited by mike in co; 07-07-2015 at 04:55 PM.
-
In the 6ppc I have not found LT30 to be as sensitive to case fullness as one might expect.
-
I've tried couple powders like h322,133 with excellent accuracy going to the 133 40ish grs (bibs 112's). I have plenty of lt-32 and would like to try some, but just don't know where to start. If you guys have any info on lt-32 in 30x47, please share.
-
Both 133&135 work very well in 30X47, until I rechambered to 30BR, I used 39gr of V-133 with a Fowler 135 gr bullet with excellent results! Kreiger 15 twist Barrel. I also tried V-135 and the two powders were close in grouping, hower I chose V-133 because I had quite a bit of it. I would think Lt-30 would be worth trying! I am now using 8208XBR in the 30BR 15 twist and absolutely no signs of pressure using 125 gr bullets.
Last edited by Steelhead1; 07-09-2015 at 03:25 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules