Results 1 to 3 of 3

Thread: 6xc barrel ?

  1. #1
    Join Date
    Jul 2010
    Posts
    38

    6xc barrel ?

    I was wondering if anyone on hear has ever tried the 6mm 115gr DTAC with a 1 & 7 twist. Instead of the 1 & 7.5 twist used by David Tubbs. I planed on using a 30" Kergier barrel

  2. #2
    Join Date
    Jul 2010
    Posts
    38
    How would I go about finding out what reamer to use for them 115gr DTac in my 6XC barrel

  3. #3
    Join Date
    Mar 2003
    Posts
    673
    Make a piece of brass. Seat a bullet to the length you want it, i.e. put the boat tail where you want it to be in the dummy round. Send the dummy to David Kiff. Tell him you want the reamer and it's leade or throat to be best suited for this arangement. He'll make the required measurements and set you up a reamer. You may want to specify neck deimensions etc.

    Paul

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •