Results 1 to 4 of 4

Thread: Sling Swivel Stud

  1. #1
    Join Date
    Feb 2003
    Posts
    121

    Sling Swivel Stud

    I have a Winchester varmint rifle with the H&S Precision stock. I want to remove the sling swivel studs from the stock for shooting off bags and want to insert a threaded plug in the stock. I don't want to fill the holes permanently - just want to insert a threaded plug that will be flush with the stock (in case I want to use the studs again).

    Any ideas what to use would be welcome.

    Thanks for the reply.

  2. #2
    Join Date
    Jul 2005
    Posts
    1

    Try this


  3. #3
    Join Date
    Jan 2005
    Location
    Central Arkansas
    Posts
    540

    Link

    Link no worky.

  4. #4
    Join Date
    Aug 2005
    Posts
    9

    swievel stud

    Just put in a set screw. Screw it down till its flush. I think it is a 10x32 thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •