Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 57

Thread: Solder rem 700 bolt handle after timing

  1. #16
    Join Date
    Jan 2009
    Location
    Ca.
    Posts
    586
    If you don't look how is it that you can now reply. When you put someone on the ignore list they sort of diss-appear.
    In regards to your question do a YouTube search and you will find what you are asking for.

  2. #17
    Join Date
    Aug 2005
    Posts
    793
    trick is to have the proper jig and the method to keep the body of the bolt cool. Otherwise there is the possibility of warping the bolt body. Just to put some sanity back in the thread.

  3. #18
    Join Date
    Dec 2017
    Location
    Idaho
    Posts
    408
    Quote Originally Posted by blades View Post
    trick is to have the proper jig and the method to keep the body of the bolt cool. Otherwise there is the possibility of warping the bolt body. Just to put some sanity back in the thread.
    Thanks. I have those guys blocked, so I donít see their messages. Best tool on the site. I made a jig that screws in with a long piece for a heat sink to help. Just curious what to watch for on the tig side of things. Iím no expert with tig. Only have it for my aluminum boat stuff I play with.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	FDBCE15C-8950-4363-8BEF-2F7A18C2AF0D.jpeg 
Views:	156 
Size:	1.66 MB 
ID:	23306  

  4. #19
    Join Date
    Feb 2003
    Location
    Alaska
    Posts
    332
    Mram10,
    H'sink & Purge is your best option.

    Fixtureing with a rotating piece is pre-school ignorance.

  5. #20
    Join Date
    Jun 2004
    Posts
    985
    Quote Originally Posted by Mram10 View Post
    Is there a reason youíre acting like a jerk to me? Luckily there are some good guys here. Done dealing with the als and others in his sorority here, so if ya want added let me know. Iíll build great guns with or without your help so not sure why you want to act that way
    The story I mentioned refers to a time when Saul went prophet shopping in support of an action he had already determined to take. The prophet Micaiah blew him off and told him what he wanted to hear initially. When Saul demanded that he be told the truth. Micaiah told him that he (Saul) would die. Which he did. Over the past months you have repeatedly asked for advice/instruction about numerous projects and got pissed when some experienced, knowledgeable folks told you the truth. You also insist that you have put them on your ignore list, which is redundant as you clearly already ignore anything that doesn't fit with what you have already decided to do. My suggestion is that you go ahead and do what you intend anyway. Surely the Lord will bless your efforts. As to being put on your ignore list, I'll just have to live with that. I surely won't ignore you as it's a lot like watching a train wreck in slow motion. A person just can't look away.

    Rick

  6. #21
    Join Date
    Mar 2019
    Posts
    20
    I guess you can get some help on this site but geeze you sure have to put up with a lot of crap.

  7. #22
    Join Date
    Feb 2003
    Location
    Alaska
    Posts
    332
    Quote Originally Posted by 1911Nut View Post
    I guess you can get some help on this site but geeze you sure have to put up with a lot of crap.
    One brings it upon himself...time & time again.

  8. #23
    Join Date
    Sep 2003
    Location
    Oriental, NC
    Posts
    918
    Quote Originally Posted by 1911Nut View Post
    I guess you can get some help on this site but geeze you sure have to put up with a lot of crap.
    You can get a lot of help if you're willing to listen.

  9. #24
    Join Date
    Dec 2017
    Location
    Idaho
    Posts
    408
    Quote Originally Posted by Greyfox View Post
    The story I mentioned refers to a time when Saul went prophet shopping in support of an action he had already determined to take. The prophet Micaiah blew him off and told him what he wanted to hear initially. When Saul demanded that he be told the truth. Micaiah told him that he (Saul) would die. Which he did. Over the past months you have repeatedly asked for advice/instruction about numerous projects and got pissed when some experienced, knowledgeable folks told you the truth. You also insist that you have put them on your ignore list, which is redundant as you clearly already ignore anything that doesn't fit with what you have already decided to do. My suggestion is that you go ahead and do what you intend anyway. Surely the Lord will bless your efforts. As to being put on your ignore list, I'll just have to live with that. I surely won't ignore you as it's a lot like watching a train wreck in slow motion. A person just can't look away.

    Rick
    God loves people using the Bible to support them being a jerk. Nice witness buddy. Youíre added per request. Being willing to listen and learn shouldn't require a person to get crap from people he doesnít know to get that info. I was raised to be respectful but when pushed, you donít back down from long winded, arrogant know-it-alls. This site doesnít have a monopoly on experience or knowledge. Too bad the good guys have to deal with a handful of keyboard tough guys.

    Tell ya what. Letís call off the name calling and backstabbing. Save it for if/when you see me in person at a competition or shot show. Be real men. Be respectful on here and if you have a problem say it to my face. I didnít start the snotty comments, but I have no problems addressing them in person.

  10. #25
    Join Date
    Dec 2017
    Location
    Idaho
    Posts
    408
    Quote Originally Posted by 1911Nut View Post
    I guess you can get some help on this site but geeze you sure have to put up with a lot of crap.
    There are some great guys here that have been helpful, which is why Iím here. There is a group like aoc and the squad that loves to act tough from their basements. They donít want questions why, just do what they say. If you canít answer a question then you arenít experienced enough to teach.

  11. #26
    Join Date
    Dec 2017
    Location
    Idaho
    Posts
    408
    Quote Originally Posted by Dave Tooley View Post
    You can get a lot of help if you're willing to listen.
    This shows you have no idea how this got started, Dave. Donít put blame on me without having the facts. Look back at the headspace thread that started all this and see that I was nice while being blasted, then had enough. Iím happy to learn from good teachers, not some of these guys. Donít like me, stay out of the thread. If you wonít talk about the topic, go elsewhere

  12. #27
    Join Date
    Feb 2003
    Location
    Alaska
    Posts
    332
    Mram10,
    Solder rem 700 bolt handle after timing-

    First & foremost said handle needs to be TIMED prior to "soldering".
    Second- If you insist on "soldering" you would be better served to glue said handle,as that process requires no heat.
    Third- Prep the surfaces by removing the Cadmium Free silver braze from the bolt body & bolt handle,since mixing alloy's is not like water colors to change the color.
    Fourth-Match your flux & Cadmium Type Silver Braze Alloy,from the same manufacturer,never mix brands.
    Lastly-Brazing is the correct terminology(higher temps)


    Inspect said bolt handle for any deficiencies.
    (a gas torch will not fix the above issues)
    A specialty "V" block is you best handle fixturing device verified by the obvious.

    TIG H'sink & Purge is your best option.
    (If your rhythm suffers,Pulse is your option)

    Fixturing with a rotating piece into the aft end of said bolt body is pre-school ignorance.

    TIG-
    <150 Amp DCSP
    Start Hi Freq
    (Pulse if rhythm suffers)
    15-20 CFH Argon
    60-80 CFH Helium for increase heat/color spectrum.
    .040" tungsten
    .060" tungsten if torch manipulation is shaky/lacking
    filler material

    Get on it,Torch Manipulation,Get Off it!

    There is NOT a bolt handle in existence that was/is designed to be fusion TIG welded, no matter which You Tube video you watch.

    If carbon is raised by said TIG process,atmospheric conditions have taught you a lesson...hopefully!!

    Good Luck

    I've led the horse to water...per say!!

  13. #28
    Join Date
    Jan 2009
    Location
    Ca.
    Posts
    586
    Amazing you just had to get all of those insulting words in and you expect to get respect? All you are doing is pissing off all those who do have the vast knowledge of which you have been claiming to seek.

  14. #29
    Join Date
    Sep 2003
    Location
    Oriental, NC
    Posts
    918
    Quote Originally Posted by Mram10 View Post
    This shows you have no idea how this got started, Dave. Donít put blame on me without having the facts. Look back at the headspace thread that started all this and see that I was nice while being blasted, then had enough. Iím happy to learn from good teachers, not some of these guys. Donít like me, stay out of the thread. If you wonít talk about the topic, go elsewhere
    Sensitive are we. I don't think I quoted you in my response.

  15. #30
    Join Date
    Dec 2017
    Location
    Idaho
    Posts
    408
    Dave, sure seemed like Iím the one in discussion. If that wasnít your intent, I apologize.

    Louis, dan40, you guys have been on ignore for a long time. Feel free to waste other peopleís time. Luckily, I donít see your trash

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •