Results 1 to 5 of 5

Thread: Shell Holder

  1. #1
    Join Date
    Dec 2012
    Location
    Valdosta Ga
    Posts
    106

    Shell Holder

    Anyone have any trouble with a #32 Rcbs shell holder.
    I have two that I have trouble priming ppc brass you have to wiggle the brass to center it on
    There priming tool. Also same on sizing

  2. #2
    Join Date
    Feb 2003
    Location
    Houston, Texas
    Posts
    7,280
    Quote Originally Posted by Ajshooter View Post
    Anyone have any trouble with a #32 Rcbs shell holder.
    I have two that I have trouble priming ppc brass you have to wiggle the brass to center it on
    There priming tool. Also same on sizing
    The only time I have trouble is when I let a little bit of crud accumulate in the groove. It wonít let the case go into the holder all the way.

    Aside from that. No.

  3. #3
    Join Date
    Feb 2003
    Location
    Tennessee
    Posts
    5,097
    Just asking...How does a brand new case fit in the shell holder?

  4. #4
    Join Date
    Dec 2012
    Location
    Valdosta Ga
    Posts
    106
    Quote Originally Posted by Wilbur View Post
    Just asking...How does a brand new case fit in the shell holder?
    Sloppy , I have to wiggle to get a primer to slip in place . Itís not centered correctly .

  5. #5
    Join Date
    Dec 2012
    Location
    Valdosta Ga
    Posts
    106

    Shell holder

    Problem solved Rbcs sent me a new one . Correct the problem centered perfectly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •