Results 1 to 4 of 4

Thread: 0.268 neck---6ppc Shooters

  1. #1
    Join Date
    Feb 2004
    Location
    Davenport, Iowa
    Posts
    370

    0.268 neck---6ppc Shooters

    What neck diameter bushing is used for re-sizing case 0.268 necks?
    Do you change bushings for powders (ie: LT-32/N133)?
    Do you use a lighter grip on the bullet than when shooting 0.262 necks?
    Thanks for replies.
    CLP

  2. #2
    Join Date
    Mar 2007
    Posts
    297
    Doc,

    I turn to 11.0 and use 263 bushings w 2430 bullets. Have used 264 if it feels a little snug on new or annealed necks. Only use 8208.

    Mark

  3. #3
    Join Date
    Feb 2003
    Location
    Tennessee
    Posts
    6,417
    Quote Originally Posted by C.L. Peterson View Post
    What neck diameter bushing is used for re-sizing case 0.268 necks?
    Do you change bushings for powders (ie: LT-32/N133)?
    Do you use a lighter grip on the bullet than when shooting 0.262 necks?
    Thanks for replies.
    CLP
    Doc, all this changes even in a given match day. Many of these variables are interdependent of each other .


    For example, with a 0.262 neck the neck tension varies depending on jam or jump, etc. Some of the hot shooters even change 0.005" bushing squeeze and get improved results. Its much a matter of who can outguess the others.

    These now required mid teen aggs require very minute changes.

    But you already knew that.


    .

  4. #4
    Join Date
    Feb 2004
    Location
    Davenport, Iowa
    Posts
    370
    Quote Originally Posted by markharp View Post
    Doc,

    I turn to 11.0 and use 263 bushings w 2430 bullets. Have used 264 if it feels a little snug on new or annealed necks. Only use 8208.

    Mark
    Thanks Mark
    Just what I was looking for!!
    CLP

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •