Page 3 of 3 FirstFirst 123
Results 31 to 41 of 41

Thread: 30br reamer?

  1. #31
    Join Date
    Feb 2003
    Location
    Houston, Texas
    Posts
    7,097
    Guys, the only reason for the existence of my reamer is the way I make my brass. I blow it out the cases rather than necking them up.

    It is nothing more than a .330 neck, zero freebore reamer with a trim to length of 1.545.

  2. #32
    Join Date
    Jun 2010
    Location
    USA
    Posts
    509

    Cool yeah, but . . .

    Quote Originally Posted by jackie schmidt View Post
    Guys, the only reason for the existence of my reamer is the way I make my brass. I blow it out the cases rather than necking them up.

    It is nothing more than a .330 neck, zero freebore reamer with a trim to length of 1.545.
    Jackie, your method is solid and produces results - just a little difficult for those not equipped with a lathe to open up the neck on a 6mm BR barrel! The important attribute is the chamber-neck full of brass, thus no .330" diameter, "free-bore"! RG

  3. #33
    Join Date
    Dec 2017
    Posts
    302
    i fire form empty cases to use jackie's reamer.
    i think jackie does too.
    my trimmer for my 6mm dasher and 30 br is set at 1.545 for a 1.550 chamber.

    Quote Originally Posted by R.G. Robinett View Post
    Jackie, your method is solid and produces results - just a little difficult for those not equipped with a lathe to open up the neck on a 6mm BR barrel! The important attribute is the chamber-neck full of brass, thus no .330" diameter, "free-bore"! RG

  4. #34
    Join Date
    Mar 2009
    Posts
    75
    Quote Originally Posted by R Stiner View Post
    Trxr

    Here are some Reamer Prints: the Original 30BR Robinett and two Variants that work For me!
    Based upon the way I neck expand and form my brass & shoot with 7-ogive bullets.

    My cases are 1.521 to 1.522 long after case neck expander is used and fire formed.
    I trim to 1.515 length and neck turn to .3275-.3280 loaded round.

    These prints may not work for you or others!

    I'm sure there are several different 30BR configurations I think they all work very well as long as your bullet reaches the Lands or "jamb".

    The 30BR is an awesome cartridge for score shooting!

    P.S I'm not sure what Leade is! I call it Lead like the print show's

    If Jackie could post a picture of the reamer print he uses that would cover the fireform method he has had success with.

    Good Luck and enjoy the sport!
    Russ


    Attachment 21848Attachment 21849Attachment 21850

    Thanks Russ

    What procedure do you use to neck up the brass? I am looking at PMA tools neck expander and doing it in one step. Not sure what oal thats going to create though.

    Thanks

  5. #35
    Join Date
    Jan 2016
    Location
    Iowa
    Posts
    84
    TrxR

    I made my own neck expander. It has a long taper just like the PMA carbide one. I would suggest you buy PMA's carbide neck turning mandrel to match their Expander. it will make the brass a better fit to the turning mandrel.

    I made the mistake of buying one brand expander and another brand turning mandrel. That's why I had to make a expander that matched the mandrel

    Russ

  6. #36
    Join Date
    Mar 2009
    Posts
    75
    Russ : when you say 7 ogive bullets how do you tell what they are? Does the manufactorer list this? Is there any decent berger or sierra or speers that will work ? Im not sure if i can get anything like barts in canada but i will check.

    Thanks

  7. #37
    Join Date
    Apr 2011
    Location
    Peoples Republic of California
    Posts
    23
    Quote Originally Posted by TrxR View Post
    Russ : when you say 7 ogive bullets how do you tell what they are? Does the manufactorer list this? Is there any decent berger or sierra or speers that will work ? Im not sure if i can get anything like barts in canada but i will check.

    Thanks
    TrxR,
    FWIW, I have used the Berger 115 FB Targets with great success.
    If you want to go with custom get ahold of Randy (Bib Bullets) and see what he recommends.
    Most of the top shooters use his bullets.
    I don't know whether he can ship to Canada or not.
    Regards,
    Greg

  8. #38
    Join Date
    Dec 2017
    Posts
    302
    "most" is a pretty big comment.
    i agree great bullets as are barts..i shoot barts.
    i have shot 115 bergers very well.

    Quote Originally Posted by wfcustom View Post
    TrxR,
    FWIW, I have used the Berger 115 FB Targets with great success.
    If you want to go with custom get ahold of Randy (Bib Bullets) and see what he recommends.
    Most of the top shooters use his bullets.
    I don't know whether he can ship to Canada or not.
    Regards,
    Greg

  9. #39
    Join Date
    Mar 2009
    Posts
    75
    When i read a 7 or 8 ogive bullet what is the exact measurement of the two? Also im assuming using the same barrel a 8 ogive would be seated deeper into the case than a 7 ogive?

    And i would like to apologize for all the questions but i am new to this and want to learn as much as possible.

    Im also reading as much as possible about making bullets as there dont seem to be alot of options here in Canada.

    Thanks

  10. #40
    Join Date
    Jan 2016
    Location
    Iowa
    Posts
    84
    TrxR

    I'm no expert on ogive measurements. I skipped math class for lunch!

    all I can say is the sleeker the bullet is on the front end it has a higher ogive #.

    Example: 118gr 10 tangent ogive bullet is sleeker front end than a 118gr 7 tangent ogive.

    Therefore the 7 tangent ogive will seat further into the case neck when touching the lands.

    Good .308 bullets that work the best with a 30BR are short 110gr-118gr.

    As far as commercial bullets Sierra .308 110gr HP has showed the best results in my rifles.

    Russ

  11. #41
    Join Date
    Dec 2003
    Location
    washington.........STATE that is.
    Posts
    9,626
    Quote Originally Posted by TrxR View Post
    When i read a 7 or 8 ogive bullet what is the exact measurement of the two? Also im assuming using the same barrel a 8 ogive would be seated deeper into the case than a 7 ogive?

    And i would like to apologize for all the questions but i am new to this and want to learn as much as possible.

    Im also reading as much as possible about making bullets as there dont seem to be alot of options here in Canada.

    Thanks
    OK, the term 'ogive' is a DESCRIPTOR, not a "measurement" per se.

    A "8 ogive" is a section or segment of a circle, that is 8 diameters radius.

    I'll try make an easy example;

    (Except I'm gonna' use INCHES not metrics cuz, 'MUR'CA!)

    -a 50 cal bullet is 1/2 inch in diameter
    -8 times 1/2 inch is 4 inches
    -so if you make a circle with 4 inches radius (ie, 4" from centerpoint) the circle is 8 inches across
    -now you take a hunk of that circle and use it to make one side of the bullets point, lining up and blending in neatly and

    VOILA'!!!

    -you've made one side of an "8 ogive" bullet nose, and because you blended it it's a "tangent ogive"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •