Search:

What I figured, we ain't talkin the same language. A zero group is a zero group any way one looks at it but I can see it's pointless to continue with this.

Pete

between score shooting tuning and Group shooting tuning somehow. We strive to hit the same hole every time, actually, if one wants to win a VFS match they had better be able to. Why anyone would want...

We arrived at our winter quarters yesterday afternoon without any problems. Everything here is in reasonable shape considering it has sat here for 7 months idle. We seemed to have drug chilly air...

AND, i have changed my mind a bit regarding power amounts and the process in total. Firstly I would say it is ASOLUTELY critical to know exactly how long loaded rounds are using proper measuring...

but .100" would be the max shoulder on that barrel or .050" a side. Not very much and a poor place to save weight if that was the intention. More likely it was barrel length that was the issue.
...

Spent the past eight days going to and coming back from and hunting in South Dakota; Pheasant hunting. It was cold but we had a pretty good hunt. Lots of small birds from second hatches due to the...

that Savage would not have noticed the barrel shoulder barely fit in the first place? A flat washer that is a bit bigger than the barrel O.D. seems appropriate to me. If it comes back, I'll do that....

I found one with a dot, new in the box for a good price. I had considered earlier buying one with a crosshair only but wanted a dot. The Factory told me they had two dot reticles left and if I wanted...

Tim,

The easiest way to avoid my theories is not to read them.

Pete

One could put a so called Rimfire tuner on a centerfire rifle and tune the barrel with it.Tuners are all about weight, Period.

Pete

Got the finish bore done in the collet and with some degree of difficulty I got the air tank and regulator out of the rifle. Everything looked to be ok but I did wipe off the surfaces of the valve,...

And roughed out a collet like the guy in the UK sells. I think I will be able to get the thing apart now and I also watched a couple of vids on fixing leaks so I MAY be good to go. I'll report on the...

Who works on Air guns in America? I know there must be some!

Thanks,

Pete

seem to try to make thing as difficult as they can for everyone else. I agree 200 percent with what you say here. Some folks need to work on themselves a lot! The rest of us grew a pair a long time...

anyone who is distracted by others when they are shooting isn't paying enough attention to their own windflags. Any experienced shooter who can't focus on their own space should try to train them...

It's kind of a shame there hasn't been more of it. I guess that's the real reason PS magazine ultimately failed; lack of innovation to report on.Like, how many combinations of PPC's can there be and...

Check your PM
Pete

I have two good quality air rifles I wish to sell. Can someone advise as to the best place to advertise them?

Thanks,

Pete

I have an EV2 with a leak around the base of the air tank. I tried to take it apart but think it requires a special clamp to take the tank loose, at least I saw a Youtube in which a fellow used a...

I googled it and found a conversation in which a lad advised to peen the threads forward half way and then the front, backward. There was nothing to peen on these threads that I saw but I did tap...

I am able do do a lot of stuff others can't seem to. Actually I use two of the pads and when they get squished they are well over an inch long. Remember, I'm not trying to lap the whole barrel, just...

on the fore end of this rifle. There is a metal piece held on with two screws that is keyed into the piece that butts against the action, that may be adjustable but it would leave a loose barrel on...

was greasing up the threads and using a small adjustable hook spanner I have to pull the barrel into the centering position. It required enough effort that I think the rifle will be good for a few...

I got them from Midway I think. Made in Germany, VFG Weaponcare I think. I first saw them in use with .22 Rimfire stuff. A guy at a match was using them to clean with. It occurred to me they would be...

If the ogive slope is inconsistent, none of em will shoot but if one controls that dimension, most of em will shoot just fine.

Pete