Search:

so in real life i had a couple of case not drop, the case mouth would hit/ding the stock foam just enough to stop it.
soo i made a kick plate. .032 al sheet rolled to just over 1/2 id and removed a...

no cussing allowed al....
no

nice try...i do not get that page nor those tools when i click on edit message


i get a bare bones version of my page and the ability to edit the text

your tools do not show up in my "edit post" page...
no film icon...no nothing but "manage attachments" and it aint working
its how i have always added pics...i have a new computer...who knows
it...

click on "manage attachments" button changes color but nothing happens

some talk over on the gunsmith forum.
alex wheeler lrb stock
borden brmxd drop port
krieger 1/8 237 28" chambered by gary o'cock my dasher reamer
jewell br trigger
nf 15-55x comp in burris...

yes i started with 1/2" and then opened a little.
after live fire testing will seal it all.

i found pics of funnels...NONE IN STOCK
and cut based on the internal shape of those funnels
my action now drops a dasher case out the bottom.
some clean up and cosmetic work to do.

se there is an advantage to a 67 vw...no electronics.....
as far as scrubbing use body temp water to prevent skin pores from closing on debris.
twinkies rule

so this is a 6mm dasher drop port, borden brmxd .
so how big is the outlet in the bottom of the stock ?
just copy the action port
bigger than the port, how so ?
smaller than the action port ??
...

brownells sells small plastic jars in various grits

It was a practical session in the psychology class. The professor showed a large cage with a male rat in it.

The rat was in the middle of the cage.

Then, the professor put a piece of cake on...

ya need to chamfer the case necks and they are probably too small, and too hard

so i did as i said, i lined up the 2 stocks as best i could and drilled two 257 holes.
i then took the new stock and laid out a center line. it shows the forward hole is off about 0.010.
easily...

so thanks for all the input. it appears that if i want to shoot this rifle this year(nationals in sept), i need to do it myself.
i have spent time this week prepping brass for fire form, and at the...

but just as you profess support, i am allowed the opposite when it is true.



now to see if you can let it go

the pillars in the old stock have an F hole(257).
the pillars are my drill bushings

but to be real clear if they quit making it yesterday,and you want it inlet tommorrow too bad..
and not a new customer a long time repeat customer...but no longer

so, i have one inlet stock, fully bedded to the same basic action.
i think this provides a tool to guide the location of the action screws.
once those 2 holes are in place i have ref points for...

and in this case i disagree with yours.
opinion or not inletting has been part of their day to day biz...until now
moving on

i have a masterclass stock as well..bought from alex.
but i think he has gone to wood only...and then there is the distance...he aint close.

thanks

well there is always two sides to a story
i am local to mcm, and they have inlet several of their stocks for me.
BUT
I BOUGHT A WHEELER/MCMILLIAN LRB STOCK AND MCM WILL NOT INLET IT.
they stopped...

I CAN do a pattern/layout based on the first stock,
remove a ton of material with just down cuts
my big concern is getting it all straight/inline with the stock

hmmmmmmmmmmmmmmmmm
if you look in the back..it clearly says the brand that was listed....the building in the back is a generator...for the charging station for the ev\s

so i have a mcmillian.wheeler lrb stock that has no inletting.
mcmillian has done them in the past but now refuses.
neither of my 2 local gunsmiths will do the inletting
the good news is i own an...