Search:

Nathaniel G. Lambeth, Sr, d/b/a Custom Guns and Ammunition, L.L.C. Invented, paid for the original R&D and Prototyping of the Micrometer Adjustable Reamer Stop. Dave Kiff and Pacific Tool & Gauge,...

In 2005 I built a high pressure flush coolant system. The engineers at Rustlic put me on to Rustlic 255R cut 5:1. I have chambered over 5,000 barrels with 50 gallons of recycled coolant. Rustlic 255R...

I really like the 243 Win. I also like the 243 AI. But if your going from the 243 Win to something faster, I suggest the 6mm Remington Ackley Improved or the 6mm/284. To convert a factory barrel....

Palma International rules require a 155-156 grain bullet.

F-Class has no bullet weight restrictions.

155-156 grain bullets have a much shorter bearing surface than the longer 185-215 grain...

I have not see any standard reamers centerfire or rimfire where the reamer shaft was not .4375" I know of 50 BMG and 20 mm reamer stops being made for the military.

Lee I have not sold spare parts in the past, I have replaced damaged or lost parts. Did you register your original purchase with me. My warranty applies only to my tooling not others tooling. My...

Hall I posted you a note on Accurate Shooter thread.

Been knocked off once, I will at least make it obvious and more difficult the next time.

Thanks
Nat

Sorry but I have to collect sales tax on retail sales.

Nat

For those who have been patiently waiting for the MARS II (Micrometer Adjustable Reamer Stops) They are now shipping from Custom Guns and Ammunition, L.L.C. (Nathaniel G. Lambeth, Sr.) 15 Sunflower...

I used a chargemaster for three years before I encountered an issue that could not be resolved by reprograming. I have since sent 4 charge masters back for replacement. I have fond them to be...

Two schools of thought: buy one large enough to operate all your equipment, or buy one for each piece of your equipment. The best form of true three phase current without getting it directly from the...

The original brains in the North Manufacturing was Dan Muller. Dan left North Manufacturing in 2005 or 2006.

There are many factors that can take play in velocity variables: One that you may not have thought about besides throat length and that is bore diameter and land groove ratio. A few years ago I...

Because Steel Gauges don't Lie. Measuring tools don't always tell the truth.

Nat Lambeth

I personally own several 10-50 Sightrons, 8 x 32 Sightrons, 5.5 X 22 Night Forces, 12 x 42 Night Forces, 15 x 55 Night Forces along with a List of others.

First I would say forget the straight...

I re-barrel a lot of 308 Winchesters mostly for F-Class and Palma. I do a few for Varmint shooters and Youth shooters.

Bullet weights 110-120 I would recommend 1:17 or 1:18

Bullet weights 120-...

It has been my experience ordering steel, aluminum, and other metals is less expensive from larger suppliers. I have bought steel from almost ever major supplier. You can get a 20 foot stick from...

There are several methodologies with flush systems. The first flush system I ever saw was Willis Fowlers, he used rigid pipe threading oil and a electric drill pump. The second flush system I ever...

I have both 8 x 32 and 10 x 50 both are great scopes. The issues you may encounter shooting F Class. On bright sunny days mirage becomes a limiting factor. It becomes difficult to see the target with...

The design improvements are recommendations asked for by my prior MARS customers. The MARS II is being made in under my direct supervision to insure quality and product control. The MARS II are not...

Nathaniel G Lambeth, Sr., who originated the Micrometer Adjustable Reamer Stop, has re-designed this tool and is coming out with the New Micrometer Adjustable Reamer Stop II. We have a new...

I was Facebooking with George Gardner and he was going to Outback where he resides. There was no posting against conceal carry there. I would assume if it is a corporate policy they have not gotten...

Is this rifle being shot at paper or critters?
If paper Hornady bullets will be fine. If hunting I would recommend Nosler Accubonds, Swift Sciroccos, or Barnes Tipped Triple Shocks. H-4831,...

Front screw was made from .250 x 28 tpi cut 60 degree bevel on bottom of screw head to match metal escantlin.
Middle screw done the same.
Front and middle screw out of black anodised screws.
Rear...

Lee I sent you a pm.
Nat Lambeth