Search:

I have an extended mag box in the rifle from Kevin Wyatt and have it altered so I can get third round down

Never heard of the center feed mag boxes.

Will be looking at his website today

Do you have a pic of this?
Or, do you have a pic of a 40X repeater?

OK, relax, I hear ya. LOL!!
Was not planning on wallering out the bottom of the chamber. But... I was planning on removing the barrel and cutting a slight 30 deg. bevel and polising it nice and...

No feed lips
700 with BDL bottom metal

I have a feeding problem in my 7shortmag
My guess is that it is hitting the corner of the back end of the cahmber, right in front of the bolt nose.
After the loaded round stops feeding, if I back...

Well guys, I've got it pretty much figured out.
Disclaimer: I am not being ungratefful for all the help and suggestions. Just the opposite....... I thank you all.

Installed bushing in bolt to...

Finished product

More pics

OK, they may not be cost-effective, but it is very satisfying to make a couple.
I may sell them, $857.42 ea. Free shipping.

More pics to come as work progresses

What do you recommend for bushing I.D.?

I did the same thinig. Made a form tool and rebated all my case heads to PPC specs.
Found out a coupla' years later that it was not necessary. Oh well.

I'm running two Panda actions

There is .011" of linear trave in the bolt.

Generally speaking. Yes.
For 90% or better of the time

I can't find a Large Sako hook in stock anywhere so I ordered one from PTG. It's going to be several weeks for delivery though.
Maybe I will make up a couple out of Tool Steel on the CNC, not sure...

Bolt nose clearance? Explain please.
Do you mean inside the tenon on end of barrel?
I sent you a PM

Do you think I should cut the ring off the bolt nose and sweat a new one on?

C'Bore depth .140", C'bore dia. .546"

Sure, gimme a few minutes.
Something else, don't know if it's a problem or not.
The bolt nose was not replaced, it is original and it is not "round" it has irregular cuts in the I.D. to accept the...

The problem is that when the case mount (empty case) or when the bullet (loaded round) clears the ejector port, the case falls back in to the receiver

The ejector spring is very stiff
I also swapped it out of a 7Rem Mag that throws brass farther than I can throw a dead Cat.
No difference.

I already talked to a couple people that mentioned he windage knob situation. After looking closely and slowly, I figured out that the windage knob is not the problem.
Can you please explain more...

Rem 700 S/A 7MM WSM
Sako extractor was already installed when I bought the gun
There is no problem at all with extraction, it pulls loaded and spent cartriges out with ease
When it comes time to...

I stopped using faceplates decades ago.
I chuck a piece of round stock in the chuck and peel it to a 30 deg. taper with the compound rest.
Put the leg of the lathe dog against one of the jaws and...

Would you consider donating them to the school where I teach Precision Machining?
Allow the kids to use them.................

Yes, I can see it in the diagram, and the spring on the hand has the bend in it.
When I try to put it all together it wseems like the spring is just a very small amount too short.
That is puzzling...

Great idea!!
Lemme try that. Right now I am frustrated with it and I need to leave it be for a coupla days.
Will let you know when I get back to it