Search:

why not do it the other way around??
put the case in a k&m case holder in the chuck, and
hand feed the cutter.
i do this in two passes(two cutters)
last cut is about .0005 for match brass

the hart is a nice press but a bit over kill for seating bullets.
me thinks the $100 presses will do fine for that task
(or neck sizing)
add fl sizing and that is a whole new ball game

just because the load is "below maximum" is no proof
that the firing pin is the issue.
primer issues are "normally" a load issue.

i have an 8 lb'r of 3100 and think one of my 300 win mags could use it.
having never used it, what would you suggest as a primer ?
just lr, lr match, cci match, lrmag match ?
i have used lr in a...

when WIND is an issue, make smaller narrower frames...less for the wind to move around.
put a 2x6x( you pick the length..24/36/48) in a 6x8x(plus 6") box and fill with concrete. instant base.
pull...

i like
"DUMBER THAN A ROCK"

BULLETS !!!!!!!!!!!!!

Churches vs squirrels



The Presbyterian church called a meeting to decide what to do about their squirrel infestation. After much prayer and consideration, they concluded that the...

i do not think an executive order can contravene the constitution.

tim
if you are talking about their rotary tumbler, the drums sometimes GROW in length.
tap them on a hard floor to shorten them and then try again.
i have 6 drums for mine....working fine for...

the first pic "looks like" the bbl is pointed up...not square with the cylinder..
just the pic ???

as long as real americans own firearms. taking them away will never be easy.
only when all the ammo is gone. i would guess all the politicians would be gone first

thanks, got it ordered.

will anyone list a contact phone number...
when i click contact on the site i get nothing
thanks

only the top 10 from each class is in the magazine.
that is what i used.

thanks, i'll go look..spend some money

simply part of the problem.
large over paid poor producing group.
most fund raising is outside groups that take most of the money.
just like the 2 major parties they only know the old way.
DO...

so does any make a one sided hss thread cutter /
where one can get real close to an edge look at bbl threads, a full size tool will not fit,
cut down one side and maybe
thanks'

what do you call 50 lesbians and 50 senators in one room ????
x
x
x
x
x
x
x
x
x

serious question
what about russian sks ???

the chinese were made on tired russian tooling, then their own.

ak/sks out performs the ar at short range,1-250 or so, then the accuracy of the ar takes over
for the record an ak zero'd at 100 has a TWENTYSEVEN INCH DROP AT 300.... an ar is only inches.

politicans, not the men nor the guns

actually 1/4 moa is not hard with the right parts..we are not talking about an m16/m4 clone, but an ar target rifle.

yeah...rib

so slab sided with big underlug, thin the top with a (not a rail, but like a rail) name eludes me as i type.

actually 4 were from california, and were shooting plastic straws which are not legal there. they had no comment on bbl maker....
or i missed, but have since corrected.