Dans40X
TIG WELDER

jackie, Looking good!! A mdl 25/625 after the initial investment/purchase will last you a lifetime. Now invest in several moon clips & for...

An AK will work in any environment. An SKS is a Chinese slam fire POS. An AR needs & likes to be run wet w/ lubricant. I do NOT support 3rd...

Don, I wondered the same.

Steve, that was hard wasn't it>

A filter will decrease the blue light intensity of LED illumination & eliminate glare.

You are correct Bill. Only an extra visual inspection check. My Remington primers have a harder primer cup than my Federal or Winchester.

All dependent on the manufactures management- Were Federal primers & CCI primers the same quality 20+ yrs ago? Not in my reloads of multiple...

Don not making them any more?

I would forget the 25 as not many top notch bullets are available. If you don't have winning bullets, the rest of the project is a waste of time and...

I use an LED maglite for the whiter/brighter light for my Gradient Lens borescope. Actually,a buddy in the Non-Destructive Inspection business...

Timmy, I didn't see that RF was specified.

If you are speaking of throat fluff from the reamer, I put some 0000 steel wool on a brass brush. I use a hand drill and and work it in the throat...

OP, The AR 7 hammer & trigger are of different configuration than an AR 15/AR 10. Though possible to eliminate the disconnector spring out of an...

John is a treasure! He has helped me with a lot of things and I don't forget.

OP, Run a 125cc power head w/ 72" Ti bar felling saw & the 70cc power heads are arborist / limbing saws.

Op, Any small engine repair shop should be capable of cross referencing a recoil spring. Take the complete recoil starter with you to change the...