Stewart
Registered User

Tell us how you are measuring to get this reading. For example, is the finished chamber running out in relation to the tenon, the bore at the chamber...

Greg, guess what about the parakeet stuff. A few year ago we went to Wally World in Massalon to get some Parakeet gravel to fill some elbow rest...

Jack, seeing as how you are going to be school-housing in Jim and my back yard, we may wander over and critique, after the Martinis.

Nat, timbertoes may be looking at something like the Starrett 359 protractor which is about $550. ...

In the 6PPC and 65g FB Hottensteins 3500+ is easy to obtain with Lot #1 over an Ohler chrono. From what I have shot so far, LT-32 like V133, hotter...

Al, I finally thought of the other guy watching the John Lewis record group form up. It was Greg Sigmund. In Rodney's situation and his...

Go Larry! See ya' Thursday.

Skeet once you get the DRO installed it is important to keep in mind that on a lathe there is considerable lost motion between the scale reading head...

I just found the Dave Tooley post about John Lewis's HG record, shot in 2008. Note that John's tiny group could be covered with a dime and at 30 cal....

Al, I had the honor, along with that Clinch River bullet maker whose name I can't recall, of witnessing John Lewis HG 600 record of 0.414" from...

Not bad shooting for a guy who does his own barrels, horrors, on a South Bend Heavy 10 lathe. Great shooting Rodney. Do you guys realize the...

Like this, Al. A comment, on a non-fluted bolt such as this the lug faces can also be remachined.

Not at the expense of letting our soil be over run by a bunch of desperate people. Where in the US Constitution is it written that the United States...

Where does it stop? Where does it stop Al? Think of the threaded thingy as a partially threaded stub arbor chucked in a precision 6-jaw chuck....

Move the chronigraph another 4-5 feet. Sometimes the muzzle shock wave messes up the reading, at least it does on an Oehler.

The only bolts I have trued are Remington 700/600/xp100 series. The threaded bolt is true because I machined it in a 6-jaw chuck that runs within...

The guy from Logan is wrong. He said we have US troops in118 countries, the real number is 140 countries. We have over 900 military bases around the...

Most bolts have an internal threads of 1/2-13. First, the extractor and ejectors, if present, must be removed. On those I chuck a 1/2-13 threaded...

On 4-26 Lester called me about some Krieger barrels I was wanting that he was curriently out of. He said he has about 80 to be dropped shipped to...

The scumbag should have read Gene Buckys latest article on how to use barrel tuners.

BTW, the New Hermes engraver on eBay went for $780. http://www.ebay.com/itm/230970338667?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.leanderandcompany.com/#/cutting-fluids/4544412818 This a a water soluble hybrid. They work pretty well if; 1) you can flood the...

The lock ring backing off and letting the die seat deeper is what I had assumed in my comment above. As to 0.002/3 shoulder setback on brass fired in...

Unless you want to be on the third page of a two page match report, every thing in this game is important. Plus, excessive headspace, just 0.010"...