Rimfire Bore Erosion

[Tom C.]

http://www.acme-firearms.com.au/HB%2...%20Bleiker.htm
finally found one, i imagine that's aus.dollars.

[squatty]

I bet I know somebody that could tell you all about the reason for the way the throat erodes. I thought he would chime in and tell us, but he must have been banned or something.

[Fred J]

Several years ago I was quoted 4800 give or take for the barreled action.
http://www.brenzovich.com/bleiker.htm
I know he handles CF rifles but doesn't list the RF
They are located in West Texas

[Outback]

Tim,

Not easy to takephoto of the breach area - the action is made of a number of parts - bolt, trigger set, Breach part, back part, underneath plate that holds the lot together, top rail - the engineering pecission is so tight there is virtually no play - has a special anodised hardened surface on the bolt - the bolt handle acts as a safety lug - you have to be careful with the type of ammo used as the tolerances are so tight - has a liking to Eley red & black

In 99 shot at Camp Perry

[Tom C.]

ob is that your bleiker? if so what did you use before that?

[Outback]

Tom,

My Bleiker Barrel Action is set up in another Brand stock - have used the AN2000 in this stock for many years for great sucess with a Broufgton 5C barrel the same profile as Bleiker, just 2 Ins shorter to compensate for the longer action of the AN2000
My wish would be AN2000 with firing pin at 6 - they are so easy to change barrel & reset - different barrels for various wind & weather conditions

[Tom C.]

thanks, later tom.