Rem 3 lever trigger conversion

L

Leeroy

Machinest / Gunsmith
G'day
I'm after some info on converting a standard rem 700 trigger to a 3 lever.
Anyone have any pics or drawings of the modifications and new lever required?

I would realy prefer just to fit a Jewel BR trigger but buying one here in Australia you need to take a 3rd mortage on you home to afford it.
And of course US online vendors won't ship OS... :(
I recon i could easily do the conversion my self and save a lot of money..

Cheers
Leeroy
 
Probably the easiest route is to clone a Shilen BR trigger. Get creative with the parts and springs. Be careful of the geometry of the parts between each other during movement.
A2 is a good choice for material, I think, and a surface grinder sure helps with the fine work on the parts.

Jay, Idaho
 
Leeroy,
PM me or email, I have a converted trigger that's not being used at the moment and maybe you could use it to reverse engineer. ??
Regards.
Don.H.
 
Does anyone near you have a copy of Stuart Ottsen's Benchrest Actions and Triggers? If not, maybe I will look for mine this weekend, and scan a couple of pictures and email the files.
 
You must log in or register to reply here.
Back
Top