neck dia of loaded 223 lapua brass

E

eddief

Eddie Fosnaugh
Looking to order bushings for 223 die

Could someone let me know what the neck dia of loaded 223 lapua brass is? Thanks

Eddie
 
brass

I just went through all this,I went with a 248 bushing a loaded round w/new lots of lapua brass measures .250
 
I use lapua brass on 3 guns, 2) use a .242 bushing and one use's a .241 bushing I tryed from .243 down to .240,, I shoot 55 gr GameKings to hunt & 52 gr Fowler/Schieder bullets for factory match shooting, coated bullets for both hunting & match) Vitv N-133 (25.0gr's) and fed 205GM OR rem 7 1/2 primers,

the wind is my friend,,,,,,,,,,,,,,,

DD
 
i do not have any of the new lapua 223 match brass. i own bushings from 240 to 247.

i maybe wrong but some of those bushings sizes listed in the above replies seem on the samll size for a 250 finished round.

i'm always willing to listen to reason and learn.
 
Eddie ...

My 223 Lapua cases with a Ronnie Cheek custom made .224 bullet seated measured .249 with an unturned neck. I mostly used a .248 bushing.

I have 4 Redding bushings available if interested. Two .248 Titanium Nitride, one .247 Heat-Treated Steel, and one .246 Heat-Treated Steel.
 
.247 or .248 always worked well for me. My loaded rounds are .250 with Lapua brass.
 
You must log in or register to reply here.
Back
Top