Bullet Making Dies

[Andrew Proll]

I am trying to purchase some 6mm log range Bullet Making Dies, I am in Australia and no one makes them here, could anybody give me some information on were I could purchase them in the US or any Dies Makers their.

 

[PR2Shooter]

Jeff Peinhardt
StaMoly

Jcp@epix.net

Carbide Bullet dies
Purpose built custom Bullet presses

 

[BillBrawand]

i am trying to purchase some 6mm log range bullet making dies, i am in australia and no one makes them here, could anybody give me some information on were i could purchase them in the us or any dies makers their.

check with bill brawand reasonable. 1 814 335 0450 c 1 814 929 5424 h.

 

[Andrew Proll]

Thank you for the information I’ll contact them

 

[BillBrawand]

thank you for the information i’ll contact them

also new designed presses and ejection frames. Got rid of threaded rods in the waynew presses will do a million cal just one press.

 

[BillBrawand]

also new designed presses and




ejection frames. Got rid of threaded rods in the waynew presses will do a million cal just one press.

will do all three steps without takeing die body out of press.

 

[High Noon]

...all three steps..

...ya Bill you must have it hooked up to either to the milking machine or the oil well pump....lol...just kidding High Noon

 

[BillBrawand]

...ya bill you must have it hooked up to either to the milking machine or the oil well pump....lol...just kidding high noon

to do what i wanted i have 40 some presses set up in my shop. I finaly figured a better way thank for the reply .