B
Bill Whitener
Guest
I am looking for a 30 cal bullet board uesd in making bullets . Does anyone make these any more? Any leads would be appreciated.
Wayne Shaw
Active member
Bill, don't tell me you're slinging those punkin balls? 
B
Bill Whitener
Guest
Finally got a 30 br made. It only coast me a new lathe , all the tooling. new dies and a few other things that I won;t mention {due to my wife finding out}
It sure does punch BIG holes- no wonder you guys score so good!!
It sure does punch BIG holes- no wonder you guys score so good!!
steve stanley
Well-known member
Welcome to the Dark side Bill, You are going to be deadly with a good 30. Steve
geo.ulrich
Member
email me i am making 30's george
B
Bill Whitener
Guest
Geo can't seem to get your e-mail to work . Mine is bwhitener1@att.net
Bill;
I have found that MTM P-100-9 do an admiral job, they keep everything free from dust, dirt or any foreign matter. You can store lubed jackets in any stage without worry of contaminating them and finish the process as time permits. I use them for 6mm and 30’s, Cabela’s also has their brand listed as 380/ 9mm for less $ than MTM.
Rick
I have found that MTM P-100-9 do an admiral job, they keep everything free from dust, dirt or any foreign matter. You can store lubed jackets in any stage without worry of contaminating them and finish the process as time permits. I use them for 6mm and 30’s, Cabela’s also has their brand listed as 380/ 9mm for less $ than MTM.
Rick
Jim Erickson
Member
You might want to give Jerrel...
Mattingley a call; he makes excellent bullet trays at a reasonable price.
JerrelMM@aol.com or 801-809-9086
Jim
Mattingley a call; he makes excellent bullet trays at a reasonable price.
JerrelMM@aol.com or 801-809-9086
Jim