Search results

If it stinks, Turn it into fertilizer

The last guy to answer you was correct. No harm, no foul. A crossfire only counts if the bullet strikes the scoring area. nothing if it is in the sighter. Been there , ddone that. David

Not to start a pissing match But the 6BR Norma and the 6BR Remington are just enough different to cause the problem you are describing. The Norma is larger at the web, across the board. If we were speaking about my rifles, I would order a new set of reamers, 6mm and 22, in Norma specs David

Kyle Why would you not post it so MOST folks cn get the results? Some are not members of Accurate.

I need you mailing address, please. What I wrote down is wrong, according to USPS David

Rip Smiley. You will be missed

Flying Fish Fundamentals ( Dave Halblom) will sponsor a rotation as well.

good decision hard, but right decision

I know I have gone around the bend. In talking with a "friend" he suggested i try and find some specific Hines jackets for my first foray into making 6mm bullets. All are .820 length. Lot # 80-84 and lot #98-100. Let me know if you have any or know where there are some. David

Since the Hall is a straight top action, the only thing you will need to be concerned about is the diameter of the picatinny base. I don't recall offhand what the diameter f the M action is. I know is is bigger OD than any of my S actions. base your search on the OD. Or you can take a couple...

thaks Al I appreciate the trust David

be aware that depending on the age of your Hall, you may have to drill out a blind roll pin to get the cocking piece loose. I have rebuilt 4 Halls, from srl. #79 to srl. # 877. All of them had the blind pin and were a ROYAL PIA to get disassembled. Alan was not one to use doubled setscrews David

get hold of Western Powder. They are the ones who did the "Data" powder. It is surplus or pull down powder. David

Get hold of Leupold in Oregon. David

Have you been in touch with Cristian Rando? David

Welcome You are in for an exciting ride. David

Do we have the final tally from today and the week? David

actually what you call a "flipper" is a Dunrud sighter cam. Made in NW Minnesota, when it was made. I believe he has quit building them. David

were you using Nbrsa.org?

So Al Are you also a private pilot?