Search results

Tony, Thank you for your continued support of our products, it is appreciated as are all of our customers. Thank you for extending the invitation, I’ll see if I can make it to the Nationals this year. I’ve attended a few matches at Piney Hill over the years and spent an afternoon at the ABRA...

Tony, I copied and pasted this quote from your above response: “As you probably know the Turbo V1 has a longer bolt lift, longer firing pin fall, and of course two locking lugs. The Turbo V3 has three lugs, a shorter bolt lift and shorter firing pin fall. Many find this shorter lift...

We don’t use a bottom metal when bedding a stock for our products, have always used individual pillars. I understand your thought for wanting one but in reality, it is common practice for us to provide a drawing to customers with the dimensional information they need to inlet and bed a stock if...

Scott, The receiver you referenced is our IR 50/50 Sporter model and is design to meet the IR 50/50 Sporter equipment requirements. The magazine used on the IR model helps reduce overall weight due to it being an all plastic assembly. It’s not a repeater and was never intended to be. The V3...

Can you elaborate on the bottom metal trigger guard? What I mean is, are you asking for a bottom metal trigger guard that would incorporate the magazine as well? As far as the mag release goes, we’re making these in house so manufacturing a longer version would not be a problem. Is the idea of...

Here you go:

1000 rounds

Frankr, A single shot adapter would be easy enough to make, and I will, if there is a need. Tony, The positioning of the magazine allows the round to be seated in the face of the bolt prior to the bullet itself touching the chamber throat. I have cycled close to 1000K rounds through the...

Keith, The upgrade was implemented in March of 2023. The easiest way to tell if your V3 has the upgrade is to look at the firing pin slide and bolt handle. If your V3 has the upgrade, the firing pin slide will have a top lifting lobe and the bolt handle will have a lifiting cam on the top as...

Sorry, I just recently found a small stash of them I didn't know I had squirreled away in a small parts container.

I have some of the original Turbo FP springs in stock, they are 0.240" O.D x 0.048" wire and have a free length of 2.100". They will take a set after you install them and the overall free length will measure 2.04" after installation. These are the original Flash design springs that we used in...

If you require assistance/guidance with setting up your receiver and trigger, you can call 540-438-1870 and we will be happy to help. What you have explained is a trigger timing issue and not a trigger brand issue. Best Regards, Anthony DiOrio

Larry, That is not correct, the modification is not trigger brand specific. Any Remington patterned trigger can be used. Best Regards, Anthony DiOrio

Bolt Knob Butch/Tony, The bolt knob length, by design, provides more leverage to facilitate easier lifting of the bolt. Sorry, some don't like the shape we've never received any complaints or negative feedback about the knob shape, until now. Changing the profile of the knob is an easy change...

Contact Information Dan, The office number is 540-438-1870, fax is 540-438-0766, email is anthony@dioriomfg.com or sales@dioriomfg.com. We can also be reached via the Contact Us link on our firearms website www.turboaction.net. I've checked the land lines and fax, all are working. Best...

Turbo Availability RFS99, We ship receivers out to customers whom have orders on a weekly basis, that being said, I am not aware of any order from January 2021 not being shipped. If in fact, the customer you refer to in your statement above has not received their order, I would suggest they...

Turbo Spare Parts Itlbtu2, You can order replacement parts for our receivers by giving us a call (540)438-1870 or by emailing your request to sales@dioriomfg.com. Best Regards, Anthony DiOrio

Turbo Receivers All of our our receiver models are available in any bolt and port configuration, none are special order. The majority of left hand builds we supply for left handed BR customers are left bolt right port which makes them easier to operate when sitting at the bench. At the end of...

Your clip shipped out yesterday via USPS, you should receive it Saturday. I've been extremely busy in the shop and I have not had the chance to catch up on emails and billing. I'll email your tracking number and cc receipt to you tomorrow. Best Regards, Anthony DiOrio

Turbo Options Our receiver models are all available in any bolt and port configuration you prefer, none of the combinations are considered a "special order". You can send an email to anthony@dioriomfg.com or PM if you have additional questions regarding pricing and lead times for our products...