Search results

thanks

This looks really nice. Thanks for sharing.

The Berger manual doesn't list any of those powders. They do list N540. Starting load is 34.5gr and max is 37gr.

30.9gr Varget - 2892 approx. velocity - 97% approx. fill ratio

Does anyone know if Tony still puts on a benchrest clinic? And where / how much? Thanks!

Where can a pumpkin neck turner be purchased?

Thanks for the pictures. I actually went with the idea you had posted about the bench blocks. I'm going to have one set mounted to my bench at home and one set mounted to a piece of aluminum that I can C-clamp to the bench at the range.

Thanks for the responses guys. I really like the idea of the plate/ bench blocks on the bench-talk website. I think if it had a piece that tied the two bench blocks together in the back it would work well for reloading at the range. You could C-clamp the bench blocks to the bench, and their...

Hi guys. I got a Redding Big Boss 2 for Christmas. I'd like to be able to use this press at the range. I was thinking about making a steel or aluminum plate that I could bolt it to, and then clamp the plate to the table. Please send pictures of your range setup or give me your suggestions on...

My local NAPA ordered some Lock-Ease for me. In case anyone else is interested, the part # is 765-1382.

Guys, Where can I buy Lock-Ease? I didn't see it on Sinclair's or Midways website. Thanks.

Thanks for all of the responses guys.

Tim, So you're saying to put the accelerator on a patch or brush that is already soaked with patchout, correct? This would make what I read in the book make sense.

I have the products and have used them the way the manufacturer recommends. In the first paragraph of this link it says Accelerator it not meant to be used by itself...

Hi guys. Hoping someone can help me understand Tony's cleaning method. In his book, he says "I run two 1-3/4" patches through the bore soaked with WIPE-OUT wih ACCELERATOR. After I run the wet patches through, I soak the nylon brush with WIPE-OUT with ACCELERATOR and do enough strokes with...

Thanks for the input guys. I spoke with Dave Halblom today and have decide to go with his flags. I'm thinking green and orange single vane with pink sail tails. What do you think about this color combination? I haven't decided if I want daisies - what would you guys recommend? Not sure if it...

I'm wanting to purchase some wind flags for shooting score at 100, 200, & 300 yds, and have about 20 questions. How many flags should I use at these yardages? Do you set them up differently for different yardages? I'm looking at the Graham flags. Are the XL vanes flags big enough to see...

5853 S Possum Hollow Rd, Campbellsburg, IN 47108 http://m.google.com/u/m/w8tSTc

A loaded round measures 0.266". That's why we chose the 0.264" bushing. It's a Wilson bushing, and the number side is up. After talking to Redding, I've decided to order a standard (non bushing type) full length die. I think my chamber is too large to use a bushing die with the brass I'm using.

The brass is unturned Lapua. Would a Redding type S die be capable of sizing the entire neck? Maybe the Wilson die only sizing a portion of the neck is the issue (along with the large factory chamber).