Recent content by Rflshootr

Yes. That is the plan.

What size is the bolt body turned to before installation of the sleeves? What does everyone use to bond the sleeves to the bolt body?

Yes, or the depth of the tap drill hole at full diameter would probably be more useful.

I'd like to make a seating die with my 22BR reamer. I already have a micrometer top from Redding. Does anyone have a Redding Standard (not sliding sleeve type) 22BR or 6BR seating die that they can measure the body length and thread length of for me? I emailed Redding but they told me it was...

Never mind. I just found the problem. Firing pin cocking ramp was dry and needed a little grease. Back to smooth. Something so simple sometimes. Thanks.

I have a 700 action that was trued a few barrels ago. I recently installed a new 22BR barrel and was fireforming brass with fairly stiff loads. The problem is, the bolt lift got very heavy and gritty feeling even on an empty chamber after the trigger was pulled. The lugs and abutments were...

What RPM's do you run your PPC carbide reamer? The one that I'm buying is a 22BR, so pretty close to the same thing.

If you could purchase a carbide chamber reamer for the same price or less of a HSS reamer, would you? Pros and cons of carbide reamers? Also does anyone know the industry standard diameter for the pilot diameter for bushings on the reamer itself for 22 caliber? (the diameter for the...

The brass may have gained some capacity. The barrel may have gained some velocity. You may have annealed softer then factory.

Thanks.

Well, the soot went away with 1 more grain and just got better the higher I went. I did notice a large velocity swing with the 210 primers. I went to WLR's and worked back up and it shot better than I expected a Remington factory sporter barrel and a 4 lb. trigger to shoot. The velocity from...

Will do. Thanks

WOW! That's very scientific of you. The reason you don't answer my question directly, is because you have nothing to back up your statement about changing powder and probably have never even used StaBall powder or even a slight inkling of a recommendation. The max load data I posted was from...

So, what would be your choice of powder(s)? Please tell me why you think StaBall 6.5 isn't a good choice.

I just got data from Berger. They said, " This is a situation where the differences in a given bullet design will call for different load data and you will see where our data developed for use with both our 95gr VLD & 95gr Classic Hunter bullets is totally different than the data that our...