Welcome, Guest ( Register | Login )

Sort By:   GridListGallery

Newest Classifieds in Reloading

Photo Title Description City Price
PMA Powder Measure Stand PMA Powder Measure Stand The PMA Powder Measure Stand is light weight, fits a wide range of bench top thicknesses and has plenty of height adjustment.   http://www.pmatool.com/product_info.php?cPath=3 0&products_id=168 Fort Wayne $65.00 USD
PMA Micro Die Adjuster PMA Micro Die Adjuster The PMA Tool Micro Die Adjuster (MDA) replaces your existing lock ring and can be used with nearly any 7/8-14 full length sizing die. We've successfully used this tool with sizing dies from Redding, RCBS, Hornady, Lee, Harrells Precision and those made from Newlon Precision die blanks. It allows you to easily make adjustments to your “shoulder bump” as fine as .0005”. The engraved marks on the MDA are equal to approximately .001” (true adjustment .000992”) of adjustment to the shoulder bump. Splitting the engraved marks is therefore approximately equal to .0005”. The design of the MDA does not allow it to work with the Forster Co-Ax press. Some custom dies for very short cartridges may require the use of an extended shellholder.Micro Die Adjuster shown in use installed on Custom Newlon/Scott 6mm PPC Die and Harrells Precision Compact Press. Available with set screw locking feature or thumb screw upgrade locking feature.   http://www.pmatool.com/index.php?cPath=31_48   Fort Wayne $60.00 USD
Hornady/Stoney Point Mod. Cases for OAL Gauge Hornady/Stoney Point Mod. Cases for OAL Gauge Less than half price @ $3 each!!! Hornady/Stoney Point modified cases for OAL gauge, all new in packaging: $3 ea ch for 17 Rem, 218B, 220Swift, 222 Rem Mag, 22PPC, 223 WSSM, 243 WSSM, 6.5 RemMag, 6 Rem, 6.5 Grendel, 250 Sav, 25.06, 257 Weatherby Mag, 270 WSM, 7BR, 7STW, 7 Ultra Mag, 7 Weatherby, 7 WSM, 7-08, 7RemMag, 7x57 Mauser, 300H&H, 30/30, 30/378, 338 WinMag, 340 Weatherby, 350 Rem, 35 Rem, 35 Whelen, 375 H&H, 378 Weatherby, 8 Rem Mag, 8x57 Mauser. Shipping additional, starting at $5 for up to 3 cases. If you buy 4 or more cases, shipping is free. Payment by money order or PayPal. Please do not email us off this website, instead call Marsha or Russ Haydon, (253) 857 8832. We have several other ads for new Wilson neck & seater dies that might interest you--be sure to check them out by typing "Haydon" in the BR Classifieds search bar. Gig Harbor $3.00 USD
Wilson Bullet Seaters, std steel, new Wilson Bullet Seaters, std steel, new Unbelievably low - far below wholesale - prices on NEW Wilson standard steel bullet seaters. We are selling at $25.00 apiece. Can ship up to three of them to you for $7.50 postage; darn near all of them for $12.00 postage. Call & tell us what you want: 250 Savage, 257 Roberts or 6.8 SPC. If you are using a bullet seater, you probably use neck dies as well so we will throw in for free a neck die base for decapping with your arbor press. Payment by PayPal or money order only. Call Marsha or Russ Haydon to order, (253) 857 8832 in WAshington state. See our accompanying ad for neck dies in case you can use some of each.  Please call, DO NOT email us through this website. Gig Harbor $25.00 USD
Wilson Standard Steel Neck Die & Base, new Wilson Standard Steel Neck Die & Base, new Take your pick of new Wilson standard steel neck dies priced well below wholesale . Included with order is a free base for decapping with your arbor press. Here is the list: 6.5 Grendel, 264 Win Mag or 30-30 Win. Note that we have several Wilson bullet seaters for sale as well--see accompanying ad. Dies are $25 each. Mailing of up to 4 dies is $7.50; anything over is just $12.00. While the shipping cost will be higher, we are happy to send these dies internationally. Call Marsha or Russ Haydon with your order at (253) 857 8832 in Washington state. Payment by PayPal or money order only. Please DO NOT email us through this website--thanks! Gig Harbor $25.00 USD
Benchrite Case Lathe Benchrite Case Lathe Our Case Lathe makes neck turning brass an easy, pleasant job instead of a necessary project to be dreaded and put off. This power turning system is the result of many years of using and experimenting with neck turning systems to find the best balance of speed, convenience, power, ease of use and quiet operation. The 1/20th HP gearmotor turns cases at 181 RPM with plenty of torque to prevent drag down when making large cuts. Cases are held by the updated case holder and spindle system which makes inserting, tightening and removing cases a snap. Heavy duty switch, 14 ga. power cord, professional finish and anti-vibration feet complete a tool made to perform perfectly for many years. The lathe system comes complete with large or small primer spindle and one case holder – specify cartridge. Instructions included, Made In USA. Please visit our NEW Web Site at www.benchrite.com Additional large or small spindle: $40.00 Additional case holders: $14.00 Shipping in USA: $8.00 Email: sales@benchrite.com Phone: 260-456-6809 Fort Wayne $495.00 USD
Bullet Cores Charlie and Cheryl Hood are offering precision swaged bullet cores to your specifications. We gladly give price quotes to your door. Please e-mail your request . A minimum order of 5,000 will avoid an additional setup fee. We ship USPS Flat Rate Boxes with a maximum weight of 36 pounds at $15.70 per box. We guarantee you will be happy with our product. E-mail us at hoodpress@windstream.net Commerce $0.00 USD