Redding, CA, 96002
I’ve made the following modifications to this stock:
Pillar bedded at the front and rear. The pistol grip area has been recontoured and the palm swell removed. The bottom of the stock from the toe foreword has been cut down and recontoured to match a short range benchrest stock with a flat bottom. A 5/16” surface ground steel butt plate is contoured to match the stock.
The forend is fitted with a channel to accept a benchrest forend rail adapter which has been modified to fit the contour of the stock. The stock modifications were finished to match the factory finish. $325.00 shipped to lower 48.