View Full Version : Torgue lbs?

02-13-2016, 03:13 PM
What is the foot pounds most use when using a click style Torque wrench to tighten short range benchrest barrel?
Thanks Chet

02-13-2016, 03:32 PM
Most shooters I know use anywhere from 80 to 150 ft pounds. Not critical as long as the barrel is tight. Always grease the threads and shoulders and snug the barrel a few times before the final tightening. This helps lap or burnish the mating threads.


Mike Bryant
02-13-2016, 05:23 PM
When I use a torque wrench, I have it set at 120 foot pounds. Sure can be tough sometimes to remove a barrel that's put on that tight.