PDA

View Full Version : 6X47 Lapua loads for varmint



D. E. Laneer
06-13-2015, 01:53 PM
I have acquired a 6x47 Lapua built on a Rem. XR100 action with a Pac Nor 9 inch twist barrel. I am going to use it for varmint hunting and need loads
for 75 gr. bullets, any suggestions? I have exhausted my options on the internet, only coming up with loads for 95 gr. and heavier.

I have Hodgdon CFE 223, H335, H414, 4350SC, Benchmark, Varget, Hybrid 100V, and various other powders in less quantity.

Joe S
06-13-2015, 06:39 PM
http://www.hodgdonreloading.com/data/rifle

D. E. Laneer
06-13-2015, 07:27 PM
Thank you, but the 6X47 they list is the old .222 Mag necked up to 6MM.

However the 6X250 may give me a starting point, I will compare water capacities.

Roger T
06-13-2015, 07:51 PM
Berger Lists 87/88 grain weights in their book for the 6-6.5x47 Lap, you should be able to extrapolate from that.

D. E. Laneer
06-13-2015, 09:32 PM
Thanks again, I will take a look at the Berger loading manual.

vlcakc
06-14-2015, 12:07 PM
My 6X47L on a Savage Target Action with 26" PacNor 10 Twist barrel likes N550 and RL17 with 70-95 gr bullets. I listed load and velocity in a thread on the Accurate Shooter website forum several years ago. http://forum.accurateshooter.com/index.php?topic=3426577.msg33125627#msg33125627 Might try a search over there for loads. Of the powders you listed as available I have only tried H414/W760. IIRC it shot okay. If you are unable to find data, PM me and I'll look up my old records. Vic

JC in Calif
06-14-2015, 12:26 PM
Look here:

http://www.6mmbr.com/gunweek093.html

D. E. Laneer
06-14-2015, 04:05 PM
Thanks to everyone, with time and a chronograph I believe I am set up to find a load that will work.