PDA

View Full Version : 9.3X62 vs. 9.3X64 Dies



vicvanb
06-09-2015, 12:39 AM
What problems would result from using a 9.3X62 neck sizing die and bullet seating die for reloading 9.3X64 brass?

Wilbur
06-09-2015, 02:35 AM
I really don't know but if the only difference is 64 vs 62, and I had some dies, I'd give it a try and see. Doesn't sound like much difference.

Found this (Avast believes there's a problem here):
http://www.longrangehunting.com/forums/f19/9-3x62-vs-9-3x64-11532/

Jim Kobe
06-09-2015, 09:33 AM
I do believe the 64 case is a larger size, IIRC, head size and body

vicvanb
06-09-2015, 12:53 PM
I do believe the 64 case is a larger size, IIRC, head size and body

The difference in case head size is 0.031 inch. There should be enough clearance in a 9.3X62 neck sizing die for the 9.3X64 case to enter. Not sure about the bullet seating die?