PDA

View Full Version : Question on Flash hole deburring tool



BigGabe
02-11-2014, 03:02 PM
I've got several for the larger primer hole but they don't work on the smaller hole in the BR cases I bought. I was just wondering what's out there that I can use on the small primer flash holes. Thanks.

DeltaBravo
02-11-2014, 04:27 PM
Gabe,

I've used my LR flash hole to debur my 6BR Lapua flash holes. Just have to be careful. I guess a normal correct-size drill bit would work, too.

Dennis

Lee Martin
02-11-2014, 04:59 PM
Are you using Lapua BR? If so I like a pin vise and a number 53 bit (0.0595").

-Lee
www.singleactions.com

DeltaBravo
02-11-2014, 09:17 PM
Lee,

I've also found that my DeWalt 1/16th bit fits nicely, too. It cleans up the hole without enlarging it. I use my fingers for that and twist it once or twice, then debur the flash hole with my LR deburring tool.

Dennis

BigGabe
02-11-2014, 09:59 PM
Thanks Guys, I am using the Lapua brass. I'll give the drill bits a try.

alinwa
02-11-2014, 10:34 PM
Sinclair has several

http://www.sinclairintl.com/reloading-equipment/case-preparation/flash-hole-deburring-tools/redding-small-flash-hole-deburring-tool-prod39912.aspx

al