PDA

View Full Version : Two Tone Coatings



NesikaPPC
12-05-2013, 01:31 PM
When you have a barrel or bolt with flutes in it, and you would like to two tone the coating(dura-coat, Teflon, etc) going on the gun, is this accomplished by basically coating the entire barrel with 1 color, drying and then taping off the main area and painting the flutes? Is this an over simplification, is there another method?

Robert

alinwa
12-05-2013, 01:36 PM
filling the flutes with modeling clay is another method