PDA

View Full Version : Panda



Hippy
04-04-2013, 05:21 PM
I have a older Panda and am wanting to know IF any Panda Chambered barrells will headspace on the action. It was manufactured in 1989

Thanx,
Jim

Hal
04-04-2013, 06:36 PM
Call Kelby's

Hal

liljoe
04-05-2013, 07:36 PM
At one time the Panda had a flat faced bolt, no cone. Not sure when this changed, but I remember looking at one for sale at the SS a few years ago and someone made the comment that it was an older model with the flat bolt.

Give Kelbly's a call, they are very good to deal with.

Joe Hynes

JerrySharrett
04-05-2013, 09:17 PM
I have a older Panda and am wanting to know IF any Panda Chambered barrells will headspace on the action. It was manufactured in 1989

Thanx,
Jim

IF your Panda;
-Has a coned bolt
-AND the measurement from the face of YOUR action to the face of YOUR bolt with the bolt completely closed is 1.115"
-AND the barrel(s) in question were chambered to the above headspace dimensions
-They SHOULD fit
-SHOULD

Were it me though I would get GO and NO GO headspace gages for that chambering and test first with them.