PDA

View Full Version : Is Ringworx Still In Business?



KEITH MYERS
06-06-2011, 03:59 PM
I have tried twice to order rings with no response.

Peter Armstrong
06-06-2011, 07:38 PM
Keith,
I've tried emailing them wanting to order and have heard nothing from them.

Peter

KEITH MYERS
06-06-2011, 07:54 PM
Don Stith contacted me and said they are no longer in production. Did you try Fulgrum?

Peter Armstrong
06-06-2011, 08:21 PM
Keith,

I don't know Fulgrum, do you have any contact details??

What I'm after are some offset rings to use on a Falcon.

Thanks Peter

Bill Collaros
06-06-2011, 09:10 PM
Order me a set also if u find out Peter.

Peter Armstrong
06-06-2011, 09:46 PM
Bill
Are you sure??
You donít need to get ride of the Blackadder first??

Peter

Bill Collaros
06-06-2011, 09:49 PM
Positive let me know how you go and ill fix u up for the cost.

KEITH MYERS
06-06-2011, 09:58 PM
Here you go http://www.randolphmachine.com/rings.html

jim
06-06-2011, 10:05 PM
Coincidentally I just called them today looking for an offset one inch pair for my Suhl - they are out and looking at a minimum of 1 month probably more to have some. Also out of 30mm offsets.

Pete Roberson
06-06-2011, 10:20 PM
I have a set of each,1" and 30mm, new,
I,m left handed and they wouldn`t work for me.
Pete

KEITH MYERS
06-06-2011, 10:21 PM
If the 1" rings are the offset ones and are for the 11mm receiver dovetail like on the Sako then I am interested.

Don Stith
06-07-2011, 09:04 AM
I have a set of each,1" and 30mm, new,
I,m left handed and they wouldn`t work for me.
Pete
Pete
Did you try turning them around?

Pete Roberson
06-07-2011, 11:01 AM
Don,
It seem that would defeat the purpose, I don't want to put my head further over the stock, I want to move it further away, or more to the right not the left??
Pete

gerald
06-07-2011, 12:19 PM
Then just turn them 180 degrees

jfp
06-07-2011, 12:20 PM
pete. i would be intrested in the 30 mm ones , jim

Pete Roberson
06-07-2011, 12:33 PM
OK Jim e-mail sent.
Still have the 1"
Pete

Don Stith
06-07-2011, 01:00 PM
Then just turn them 180 degreesThere must be something about crossing the Mason-Dixon Line

Douglas
06-08-2011, 07:42 AM
I have a set of each,1" and 30mm, new,
I,m left handed and they wouldn`t work for me.
Pete

Pete, I'm left handed too and have these offset rings, you just turn them around, which ever way you want to offset don't matter right or left, what am i missing? Thanks, douglas

Pete Roberson
06-08-2011, 10:08 AM
Douglas,
The purpose of the off set is to keep your face from touching the stock!
The off set for a left hand shooter should be to the right and when I did that the bolt hit the scope.
If I had reversed them (to the left) my face would be harder to the stock and that is NOT what you want
so I went back to the straight rings on my sporter and got a set of Hall off set mounts and used straight rings
for my heavy gun.
Hope this helps!
Pete

Douglas
06-08-2011, 04:17 PM
Okay Pete, makes sense now, my bad; I don't think you said about hitting the scope with the bolt handle. i have the Rungworks and not a prob on my 40X. Thanks, douglas

Fred J
06-08-2011, 05:32 PM
I used risers so my offsetts, so the bolt would clear.

andyd1179
06-09-2011, 01:38 PM
Hya Guys,
I emailed Randolph Engineering and they won't be making any scope mounts till the Autum due to being real busy at the moment.
Off set scope mounts are mounts that are angled by around 5mm from the action so allows less connection to the stock with your cheek.

Its a shame about Ringworx as they made good mounts and I had the 30mm till I changed scopes to the Sightron which is 1" and had a buyer for the 30mm before I could say they were for sale!

I have a video of them on my rifle at www.benchrestshow.com if anyone wants to see how good they were.

I hope to maybe get a set from Randolph later this year when they are able to produce them again and will do a video on them to show what they are like.

Andyd

Don Stith
06-09-2011, 02:21 PM
Keith partially quoted my note to him. The part that got left out: Harrels is redesigning the rings and will return to production. I can not give you a firm date. The fellow originally making them is no longer employed there, but the tooling is in place. They will be an official Harrels Precision product when re-introduced

Fred J
06-09-2011, 07:45 PM
Here is another setup for a lefty.
http://i150.photobucket.com/albums/s86/FredJ_2007/Offset2-1.jpg

Albert's
06-09-2011, 09:17 PM
I have a few sets left in stock. 1" & 30mm straight or offset. Let me know if you still want some and I'll check when I get back.

Marc
(423) 367-8001

Pete Roberson
06-10-2011, 10:02 AM
Here is another setup for a lefty.
http://i150.photobucket.com/albums/s86/FredJ_2007/Offset2-1.jpg

Fred J
Where do you find those?
Pete

Fred J
06-10-2011, 11:19 AM
Pete:
They were in the Classifieds a few years ago. I don't use them any more.

Pete Roberson
06-10-2011, 12:42 PM
Does anyone recognize the rings in Fred J's picture, are
they still made and if so I would like an e-mail or web site!
I am looking for 30mm.
Thank You!
Pete

Dennis_in_VA
06-16-2011, 11:08 PM
Keith partially quoted my note to him. The part that got left out: Harrels is redesigning the rings and will return to production. I can not give you a firm date. The fellow originally making them is no longer employed there, but the tooling is in place. They will be an official Harrels Precision product when re-introduced

The first model to come out (very soon) will be a straight 30mm ring.

Which would y'all be the most interested in seeing next ( 30mm offset, 1" straight or 1" offset 3/8" or 11mm dovetail)?

We will work on the one with the most requests next.

Pete Roberson
06-17-2011, 12:38 AM
My request would be 30mm offset with a 11mm dovetail, like the picture!
Pete

Dennis_in_VA
06-20-2011, 10:02 AM
My request would be 30mm offset with a 11mm dovetail, like the picture!
Pete

Like what picture?

Harrell's hasn't posted any pictures of the new style rings.

UPDATE:

I just visited John up in NJ this weekend and he is planning to get back into production of his products. FYI.

Pete Roberson
06-20-2011, 10:10 AM
Dennis,
I do believe there was and still is a picture posted in this thread,if you start at the beginning and reread this thread
you will see it, twice, a rifle with a set of offset rings!
I am interested in the height of the base of the ring itself!
Thanks!
Pete

Dennis_in_VA
06-20-2011, 10:20 AM
Oh, you must mean the pictures that I took for John.

Well the new rings will all have a 1.5" base to scope bore dimension. So that means from the bottom edge of the base to the center of the scope body will always be 1.5".

Pete Roberson
06-20-2011, 06:44 PM
OK Dennis
So if I understand what you are saying is they will be shorter than the one in the picture which appears to be 2 - 2 1/2"?
Thanks!
Pete

Pete Wass
06-22-2011, 12:30 PM
Looking for a Fudd Adjustable top that will fit my Farley. Thanks, Pete