PDA

View Full Version : 6 PPC dies



B SLAGLE
05-02-2011, 08:40 PM
I am looking for a good set of wilson 6 ppc dies can anyone help?

Dick Grosbier
05-02-2011, 10:21 PM
I am looking for a good set of wilson 6 ppc dies can anyone help?

I believe for sizing Wilson only makes neck sizing dies. This is not what you want. Get either a Harrels which is sized to your actual chamber by sending them some fired cases or get a Redding Bushing Full length sizer.

Dick

RLHBUSL
05-02-2011, 11:29 PM
I have a new Wilson neck sizing die that I would sell. Email me if you're interested: ryanarrison@sbcglobal.net

DaveT
05-03-2011, 12:50 AM
Wilson neck sizing die with a bushing to just neck size and Redding Type S full length sizing die also with bushing.
Dave T

Mike Swartz
05-03-2011, 05:14 PM
You need to find out something about your chamber;dimensionally. Sizing dies are seldom successful when chosen on a one size fits all basis.

Mike Swartz

JerrySharrett
05-03-2011, 05:19 PM
There are several good custom 6PPC die makers. The most economical one is probably Lynwood and Walter Harrell. They make the die in 3 different sizes and if you will send them a couple of fired cases they will make one to exactly give you the correct amount of resizing for that chamber.

http://www.harrellsprec.com/

http://www.neiljones.com/

http://www.sinclairintl.com/

Joe Maisto
05-05-2011, 12:14 PM
Wilson neck sizing die with a bushing to just neck size and Redding Type S full length sizing die also with bushing.
Dave T

Right on !

B SLAGLE
05-05-2011, 06:58 PM
You need to find out something about your chamber;dimensionally. Sizing dies are seldom successful when chosen on a one size fits all basis.

Mike Swartz

The man who had this rifle built past away some time back . It is a Stolle Panda 6mmBR smith by Mike Bryant hear is where the 6ppc comes into play. The rifle came with two barrels a 6br and 6ppc the ppc was never used still new. What should I do ? How could I find out the free bore?

GerryM
05-05-2011, 07:08 PM
First you will have to put the barrel on. I hope your around A Benchrest shooter that knows how to change barrels.

Butch Lambert
05-05-2011, 07:21 PM
I'd contact Mike Bryant.
Butch

B SLAGLE
05-05-2011, 07:38 PM
I'd contact Mike Bryant.
Butch

I just wounder how for back he keeps recorders. I just hope the 6ppc will shoot like the 6Br last weekend it shoot a .0215 three shoot group at 100 yards. I just want the 6ppc to play with no group shooting for now. I am going to have me a 30BR barrel made for this rifle to shoot score with think that would be fun.

alinwa
05-05-2011, 11:29 PM
Every time I scroll past this thread "6PPC dies" I can't help but remember my old friend Samual Langhorne Clemens proclaiming that "reports of my death have been greatly exaggerated."

I feel that the PPC is still viable, and to believe it has died I'll have to view the body. :)

So THERE you'se thurty-tooters

al

Dick Grosbier
05-06-2011, 06:42 AM
Every time I scroll past this thread "6PPC dies" I can't help but remember my old friend Samual Langhorne Clemens proclaiming that "reports of my death have been greatly exaggerated."

I feel that the PPC is still viable, and to believe it has died I'll have to view the body. :)

So THERE you'se thurty-tooters

al

Who said anything about the 6 PPC being dead ? The only death I see mentioned in this thread is the poor fellow who originally owned the rifles.

Dick